| Age | Commit message (Collapse) | Author | Lines |
|---|
|
fuse_apply_conn_info_opts() was applying to 'want_ext',
which would cause conflicts with 'want' if the application
applied its own flags to 'conn->want'.
Solution is:
- to move fuse_{set,unset,get}_feature_flag and
convert_to_conn_want_ext() to fuse_lowlevel.c and
to define them as part of the public API, although
convert_to_conn_want_ext() should not be used - it is
currently needed to be a public function due as it needs
to be defined for the tests.
Related to https://github.com/libfuse/libfuse/issues/1171 and
https://github.com/libfuse/libfuse/pull/1172.
Closes: https://github.com/libfuse/libfuse/issues/1171
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
|
|
This might be useful to optimize code paths. For example, with
io-uring the request buffer is valid until the request is replied
to, while without io-uring the request buffer is only valid
in current thread context.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
|
|
Another additon for https://github.com/libfuse/libfuse/issues/1092
Use _fuse_new_versioned() instead of _fuse_new_317 and actually
also remove symbol versioning for it - we don't need it.
Signed-off-by: Bernd Schubert <bernd@bsbernd.com>
|
|
Similar previous renames to fuse_main_real_versioned,
but here for the low level fuse_session_new.
Also remove symbol versioned as part of "fuse_session_new"
as that function is not part of the official API/ABI
and to allow easier access with dlopen/dlsym.
Also switch back to a macro fuse_session_new, just in
case some code has some expectations on that.
Signed-off-by: Bernd Schubert <bernd@bsbernd.com>
|
|
As suggested by Bill in Issue #1092 make fuse_main a macro again,
just in case some applications expect it to be a macro.
Signed-off-by: Bernd Schubert <bernd@bsbernd.com>
|
|
Addresses https://github.com/libfuse/libfuse/issues/1092
We actually don't need to make fuse_main_real() symboled, as it
is not part of the official API.
The inlined function now always calls into fuse_main_real_317
and the compat ABI function (which should also be available
for dlopen/dlsym) is now always compiled, independent if the
compiler/linker support versioned symbols.
Additionally, fuse_main_real() is also declared as inlined
function and a warning message is created when that function
is called.
Signed-off-by: Bernd Schubert <bernd@bsbernd.com>
|
|
_fuse_new() is not supposed to be called by external users
outside of internal functions or static inlined functions.
This also removes several functions from lib/fuse_versionscript
which where added and exported by
commit 58f85bfa9b7d ("Add in the libfuse version a program...)
as these are libfuse internal only.
Signed-off-by: Bernd Schubert <bernd@bsbernd.com>
|
|
I see random ENOTCONN failures in xfstest generic/013 and generic/014
in my branch, but earliest on the 2nd run - takes ~12hours to get
the issue, but then there are no further information logged.
ENOTCONN points to a daemon crash - I need backtraces and a core dump.
This adds optional handling of fatal signals to print a core dump
and optional syslog logging with these new public functions:
fuse_set_fail_signal_handlers()
In addition to the existing fuse_set_signal_handlers(). This is not
enabled together with fuse_set_signal_handlers(), as it is change
in behavior and file systems might already have their own fatal
handlers.
fuse_log_enable_syslog
Print logs to syslog instead of stderr
fuse_log_close_syslog
Close syslog (for now just does closelog())
Code in fuse_signals.c is also updated, to be an array of signals,
and setting signal handlers is now down with a for-loop instead
of one hand coded set_one_signal_handler() per signal.
|
|
Fixes: 73cd124d0408 ("Add clone_fd to custom IO (#927)")
Signed-off-by: Xiaoguang Wang <lege.wang@jaguarmicro.com>
|
|
Add support for filesystem passthrough read/write of files.
When the FUSE_PASSTHROUGH capability is enabled, the FUSE server may
decide, while handling the "open" or "create" requests, if the given
file can be accessed by that process in "passthrough" mode, meaning that
all the further read and write operations would be forwarded by the
kernel directly to the backing file rather than to the FUSE server.
All requests other than read or write are still handled by the server.
This allows for an improved performance on reads and writes, especially
in the case of reads at random offsets, for which no (readahead)
caching mechanism would help, reducing the performance gap between FUSE
and native filesystem access.
Extend also the passthrough_hp example with the new passthrough feature.
This example opens a kernel backing file per FUSE inode on the first
FUSE file open of that inode and closes the backing file on the release
of the last FUSE file on that inode.
All opens of the same inode passthrough to the same backing file.
A combination of fi->direct_io and fi->passthrough is allowed.
It means that read/write operations go directly to the server, but mmap
is done on the backing file.
This allows to open some fds of the inode in passthrough mode and some
fd of the same inode in direct_io/passthrough_mmap mode.
Signed-off-by: Alessio Balsini <balsini@android.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
The API stays the same, the libfuse version comes from
inlined functions, which are defined fuse_lowlevel.h
and fuse.h. As these inlined functions are defined in the header
files they get added into the application, similar as if these
were preprocessor macros.
Macro vs inlined function is then just a style issue - I personally
prefer the latter.
fuse_session_new() -> static inlinei, in the application
_fuse_session_new -> inside of libfuse
fuse_new() -> static inline, in the application
_fuse_new() -> inside of libfuse
Note: Entirely untested is the fuse 30 api - we need a test
for it. And we do not have any ABI tests at all.
Signed-off-by: Bernd Schubert <bernd.schubert@fastmail.fm>
|
|
This fixes issue https://github.com/libfuse/libfuse/issues/810
and should avoid mold linking errors.
Commit d4e294b removed made fuse_register_module() a static
function, but forgot to remove it from the version script.
Commit fe4f942 introduced copy_file_range to libfuse and
added the non-exiting (neither declared nor defined) function
fuse_reply_copy_file_range() to the version script. Kernel
side just exects an integer reply how much was copied, using
fuse_reply_write() as in fuse_lib_copy_file_range() is sufficient
and no extra function is needed.
Co-authored-by: Bernd Schubert <bschubert@ddn.com>
|
|
The io for FUSE requests and responses can now be further customized by allowing to write custom functions for reading/writing the responses. This includes overriding the splice io.
The reason for this addition is that having a custom file descriptor is not sufficient to allow custom io. Different types of file descriptor require different mechanisms of io interaction. For example, some file descriptor communication has boundaries (SOCK_DGRAM, EOF, etc...), while other types of fd:s might be unbounded (SOCK_STREAMS, ...). For unbounded communication, you have to read the header of the FUSE request first, and then read the remaining packet data. Furthermore, the one read call does not necessarily return all the data expected, requiring further
calls in a loop.
|
|
|
|
fuse_loop_mt and fuse_new had not been defined when
HAVE_LIBC_VERSIONED_SYMBOLS had not been set and additionally,
fuse_new_31 was missing in the version script and was therefore
an unusable symbol.
This also adds a test for unset HAVE_LIBC_VERSIONED_SYMBOLS.
|
|
This reverts commit 777663953382925c7403f0560c28ec9bbd14d7be.
|
|
libfuse can now be used without having a mount interface.
|
|
On benchmarking metadata operations with a single threaded bonnie++
and "max_idle_threads" limited to 1, 'top' was showing suspicious
160% cpu usage.
Profiling the system with flame graphs showed that an astonishing
amount of CPU time was spent in thread creation and destruction.
After verifying the code it turned out that fuse_do_work() was
creating a new thread every time all existing idle threads
were already busy. And then just a few lines later after processing
the current request it noticed that it had created too many threads
and destructed the current thread. I.e. there was a thread
creation/destruction ping-pong.
Code is changed to only create new threads if the max number of
threads is not reached.
Furthermore, thread destruction is disabled, as creation/destruction
is expensive in general.
With this change cpu usage of passthrough_hp went from ~160% to
~80% (with different values of max_idle_threads). And bonnie
values got approximately faster by 90%. This is a with single
threaded bonnie++
bonnie++ -x 4 -q -s0 -d <path> -n 30:1:1:10 -r 0
Without this patch, using the default max_idle_threads=10 and just
a single bonnie++ the thread creation/destruction code path is not
triggered. Just one libfuse and one application thread is just
a corner case - the requirement for the issue was just
n-application-threads >= max_idle_threads.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
|
|
struct fuse_loop_config was passed as a plain struct, without any
version identifer. This had two implications
1) Any addition of new parameters required a FUSE_SYMVER for
fuse_session_loop_mt() and fuse_loop_mt() as otherwise a read
beyond end-of previous struct size might have happened.
2) Filesystems also might have been recompiled and the developer
might not have noticed the struct extensions and unexpected for
the developer (or people recomliling the code) uninitialized
parameters would have been passed.
Code is updated to have struct fuse_loop_config as an opaque/private
data type for file systems that want version 312
(FUSE_MAKE_VERSION(3, 12)). The deprecated fuse_loop_config_v1
is visible, but should not be used outside of internal
conversion functions
File systems that want version >= 32 < 312 get the previous
struct (through ifdefs) and the #define of fuse_loop_mt
and fuse_session_loop_mt ensures that these recompiled file
systems call into the previous API, which then converts
the struct. This is similar to existing compiled applications
when just libfuse updated, but binaries it is solved with
the FUSE_SYMVER ABI compact declarations.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
|
|
On uclibc and MacOS we don't use versioned symbols. Hence,
there's no definition for fuse_session_loop_mt on those cases
and the linker won't be able to resolve calls to fuse_session_loop_mt()
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
|
|
Fixes #467.
|
|
|
|
Applications may wish to call fuse_log() for unified logging. This way
they don't need to define their own wrappers to invoke the log message
handler function installed by fuse_set_log_func().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Add support for the relatively new copy_file_range() syscall. Backend
filesystems can now implement an efficient way of cloning/duplicating
data ranges within files. See 'man 2 copy_file_range' for more details.
|
|
The unprivileged option allows to run the FUSE file system process
without privileges by dropping capabilities and preventing them from
being re-acquired via setuid / fscaps etc. To accomplish this,
mount.fuse sets up the `/dev/fuse` file descriptor and mount itself
and passes the file descriptor via the `/dev/fd/%u` mountpoint syntax
to the FUSE file system.
|
|
According to "How to Write Shared Libraries" by Ulrich Drepper
(https://www.akkadia.org/drepper/dsohowto.pdf), the version script
should contain the exported name of the versioned symbol once in each
tag for which it has been defined by .symver.
|
|
|
|
We re-introduce the functionality of invalidating the caches for an
inode specified by path by adding a new routine
fuse_invalidate_path. This is useful for network-based file systems
which use the high-level API, enabling them to notify the kernel about
external changes.
This is a revival of Miklos Szeredi's original code for the
fuse_invalidate routine.
|
|
|
|
They were removed from source here: https://github.com/libfuse/libfuse/commit/73b6ff4b75cf1228ea61262c293fcb2fda5dfeea
|
|
- Fixes commit d49f2e77b4.
- Fixes commit 199fc0f833.
- Thanks to Github user mtheall for the review!
|
|
The current behavior makes it difficult to add help for
additional options. With the change, this becomes a lot easier.
|
|
|
|
Fixes #59.
|
|
Help and version messages can be generated using the new
fuse_lowlevel_help(), fuse_lowlevel_version(), fuse_mount_help(), and
fuse_mount_version() functions.
The fuse_parse_cmdline() function has been made more powerful
to do this automatically, and is now explicitly intended only
for low-level API users.
This is a code simplication patch. We don't have to parse for --help and
--version in quite as many places, and we no longer have a low-level
initialization function be responsible for the (super-high level) task
of printing a program usage message.
In the high-level API, we can now handle the command line parsing
earlier and avoid running other initialization code if we're just going
to abort later on.
|
|
The only struct fuse_chan that's accessible to the user application is
the "master" channel that is returned by fuse_mount and stored in struct
fuse_session.
When using the multi-threaded main loop with the "clone_fd" option, each
worker thread gets its own struct fuse_chan. However, none of these are
available to the user application, nor do they hold references to struct
fuse_session (the pointer is always null).
Therefore, any presence of struct fuse_chan can be removed
without loss of functionality by relying on struct fuse_session instead.
This reduces the number of API functions and removes a potential source
of confusion (since the new API no longer looks as if it might be
possible to add multiple channels to one session, or to share one
channel between multiple sessions).
Fixes issue #17.
|
|
|
|
|
|
|
|
Remove fuse_chan_bufsize() from the lowlevel API.
fuse_session_receive_buf() is now responsible for allocating memory for the
buffer.
|
|
Clean up fuse_chan related interfaces. Remove the following from the
lowlevel library API:
struct fuse_chan_ops;
fuse_chan_new();
fuse_chan_session();
fuse_chan_recv();
fuse_chan_send();
|
|
Clean up fuse_session related interfaces. Remove the following from the
lowlevel library API:
struct fuse_session_ops;
fuse_session_new();
fuse_session_process();
fuse_session_data();
|
|
Replace fuse_session_next_chan() with fuse_session_chan(), as multiple
channels per session were never actually supported and probably never will.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
