diff options
Diffstat (limited to 'projects/XUSP3R/verilog/softmc_top.v')
| -rw-r--r-- | projects/XUSP3R/verilog/softmc_top.v | 842 |
1 files changed, 842 insertions, 0 deletions
diff --git a/projects/XUSP3R/verilog/softmc_top.v b/projects/XUSP3R/verilog/softmc_top.v new file mode 100644 index 0000000..66ea891 --- /dev/null +++ b/projects/XUSP3R/verilog/softmc_top.v @@ -0,0 +1,842 @@ +`include "parameters.vh" +`include "project.vh" + +`ifdef XUPP3R_x4 + `define XUPP3R +`elsif XUPP3R_x8 + `define XUPP3R +`elsif XUPP3R_x8_1R_UDIMM + `define XUPP3R +`endif + + +module softmc_top #(parameter tCK = 1500, SIM = "false") + ( + // common signals + input c0_sys_clk_p, + input c0_sys_clk_n, + input sys_rst_l, + + // iob <> ddr4 sdram ip signals + output c0_ddr4_act_n, + output [16:0] c0_ddr4_adr, + output [1:0] c0_ddr4_ba, + output [1:0] c0_ddr4_bg, + output [`CKE_WIDTH-1:0] c0_ddr4_cke, + output [`ODT_WIDTH-1:0] c0_ddr4_odt, + output [`CS_WIDTH-1:0] c0_ddr4_cs_n, + output [`CK_WIDTH-1:0] c0_ddr4_ck_t, + output [`CK_WIDTH-1:0] c0_ddr4_ck_c, + output c0_ddr4_reset_n, + `ifdef XUPP3R_x4 + inout [17:0] c0_ddr4_dqs_c, + inout [17:0] c0_ddr4_dqs_t, + inout [71:0] c0_ddr4_dq, + output c0_ddr4_parity, + `elsif XUPP3R_x8 + inout [8:0] c0_ddr4_dm_dbi_n, + inout [71:0] c0_ddr4_dq, + inout [8:0] c0_ddr4_dqs_c, + inout [8:0] c0_ddr4_dqs_t, + output c0_ddr4_parity, + `else + inout [7:0] c0_ddr4_dm_dbi_n, + inout [63:0] c0_ddr4_dq, + inout [7:0] c0_ddr4_dqs_c, + inout [7:0] c0_ddr4_dqs_t, + `endif + // xdma signals + input clk_ref_p, + input clk_ref_n, + input pcie_rst, + output [7:0] pci_exp_txp, + output [7:0] pci_exp_txn, + input [7:0] pci_exp_rxp, + input [7:0] pci_exp_rxn + + ); + + `ifdef XUPP3R_x8 + assign c0_ddr4_odt[1] = 1'b0; + assign c0_ddr4_cs_n[1] = 1'b1; + assign c0_ddr4_cke[1] = 1'b0; + assign c0_ddr4_parity = 1'b0; + `endif + + // Frontend control signals + wire softmc_fin; + wire user_rst; + + // Frontend <-> Fetch signals + wire [`IMEM_ADDR_WIDTH-1:0] fr_addr_in; + wire fr_valid_in; + wire [`INSTR_WIDTH-1:0] fr_data_out; + wire fr_valid_out; + wire [`IMEM_ADDR_WIDTH-1:0] fr_addr_out; + wire fr_ready_out; + + // Frontend <-> misc. control signals + wire per_rd_init; + wire per_zq_init; + wire per_ref_init; + wire rbe_switch_mode; + wire toggle_dll; + + // AXI streaming ports + wire [`XDMA_AXI_DATA_WIDTH-1:0] m_axis_h2c_tdata_0,xdma_h2c_tdata_0; + wire m_axis_h2c_tlast_0, xdma_h2c_tlast_0; + wire m_axis_h2c_tvalid_0, xdma_h2c_tvalid_0; + wire m_axis_h2c_tready_0, xdma_h2c_tready_0; + wire [`XDMA_AXI_DATA_WIDTH/8-1:0] m_axis_h2c_tkeep_0, xdma_h2c_tkeep_0; + wire [`XDMA_AXI_DATA_WIDTH-1:0] s_axis_c2h_tdata_0, xdma_c2h_tdata_0; + wire s_axis_c2h_tlast_0, xdma_c2h_tlast_0; + wire s_axis_c2h_tvalid_0, xdma_c2h_tvalid_0; + wire s_axis_c2h_tready_0, xdma_c2h_tready_0; + wire [`XDMA_AXI_DATA_WIDTH/8-1:0] s_axis_c2h_tkeep_0, xdma_c2h_tkeep_0; + + // ddr_pipeline <-> outer module if + wire [3:0] ddr_write; + wire [3:0] ddr_read; + wire [3:0] ddr_pre; + wire [3:0] ddr_act; + wire [3:0] ddr_ref; + wire [3:0] ddr_sre; + wire [3:0] ddr_srx; + wire [3:0] ddr_zq; + wire [3:0] ddr_nop; + wire [3:0] ddr_ap; + wire [3:0] ddr_pall; + wire [3:0] ddr_half_bl; + wire [4*`BG_WIDTH-1:0] ddr_bg; + wire [4*`BANK_WIDTH-1:0] ddr_bank; + wire [4*`COL_WIDTH-1:0] ddr_col; + wire [4*`ROW_WIDTH-1:0] ddr_row; + wire [511:0] ddr_wdata; + + // periodic maintenance signals + wire ddr_maint_read; + + // phy <-> ddr adapter and xdma app signals + // dlltoggler + wire clk_sel = 0; + wire [7:0] dllt_mc_ACT_n; + wire [135:0] dllt_mc_ADR; + wire [15:0] dllt_mc_BA; + wire [15:0] dllt_mc_BG; + wire [7:0] dllt_mc_CKE; + wire [7:0] dllt_mc_CS_n; + wire dllt_done; + // ddr adapter + wire [4:0] dBufAdr; + wire [`DQ_WIDTH*8-1:0] wrData; + wire [`DQ_WIDTH-1:0] wrDataMask; + wire [511:0] rdData; + wire [4:0] rdDataAddr; + wire [0:0] rdDataEn; + wire [0:0] rdDataEnd; + wire [0:0] per_rd_done; + wire [0:0] rmw_rd_done; + wire [4:0] wrDataAddr; + wire [0:0] wrDataEn; + wire [7:0] mc_ACT_n; + wire [135:0] mc_ADR; + wire [15:0] mc_BA; + wire [15:0] mc_BG; + wire [`CKE_WIDTH*8-1:0] mc_CKE; + wire [`CS_WIDTH*8-1:0] mc_CS_n; + wire [`ODT_WIDTH*8-1:0] mc_ODT; + wire [0:0] mcRdCAS; + wire [0:0] mcWrCAS; + wire [0:0] winInjTxn; + wire [0:0] winRmw; + wire [4:0] winBuf; + wire [1:0] winRank; + wire [5:0] tCWL; + wire dbg_clk; + wire c0_wr_rd_complete; + wire c0_ddr4_clk; + wire c0_ddr4_dll_off_clk; + wire ddr4_ui_clk; + wire c0_ddr4_rst; + wire [511:0] dbg_bus; + wire [1:0] mcCasSlot; + wire mcCasSlot2; + wire gt_data_ready; + + wire read_seq_incoming; // next few instructions will read from DRAM + wire [11:0] incoming_reads; // how many reads next few instructions will issue + wire [11:0] buffer_space; // remaining buffer size + + wire sys_rst = ~sys_rst_l; // low active signal + wire c0_init_calib_complete; + + // There is a possibility that these signals are on + // the critical path as observed in + // the previous iteration of SoftMC + reg c0_init_calib_complete_r, sys_rst_r; + wire iq_full, processing_iseq, rdback_fifo_empty; + + always @(posedge c0_ddr4_clk) begin + c0_init_calib_complete_r <= c0_init_calib_complete; + sys_rst_r <= sys_rst; + end + + reg dllt_active = 1'b0; + + `ifdef ENABLE_DLL_TOGGLER + always @(posedge c0_ddr4_clk) begin + if(toggle_dll) begin + dllt_active <= ~dllt_active; + end + if(dllt_done) begin + dllt_active <= ~dllt_active; + end + end + `endif + + `ifdef XUPP3R_x8 + phy_ddr4_x8 phy_ddr4_i( + .sys_rst (sys_rst), + .c0_sys_clk_p (c0_sys_clk_p), + .c0_sys_clk_n (c0_sys_clk_n), + `ifdef ENABLE_DLL_TOGGLER + .c0_ddr4_ui_clk (ddr4_ui_clk), + .addn_ui_clkout1 (c0_ddr4_dll_off_clk), + `else + .c0_ddr4_ui_clk (c0_ddr4_clk), + `endif + .c0_ddr4_ui_clk_sync_rst (c0_ddr4_rst), + .c0_init_calib_complete (c0_init_calib_complete), + .dbg_clk (dbg_clk), + .c0_ddr4_act_n (c0_ddr4_act_n), + .c0_ddr4_adr (c0_ddr4_adr), + .c0_ddr4_ba (c0_ddr4_ba), + .c0_ddr4_bg (c0_ddr4_bg), + .c0_ddr4_cke (c0_ddr4_cke[0]), + .c0_ddr4_odt (c0_ddr4_odt[0]), + .c0_ddr4_cs_n (c0_ddr4_cs_n[0]), + .c0_ddr4_ck_t (c0_ddr4_ck_t), + .c0_ddr4_ck_c (c0_ddr4_ck_c), + .c0_ddr4_reset_n (c0_ddr4_reset_n), + .c0_ddr4_parity (c0_ddr4_parity), + .wrDataMask (wrDataMask), + .c0_ddr4_dm_dbi_n (c0_ddr4_dm_dbi_n), + .c0_ddr4_dq (c0_ddr4_dq), + .c0_ddr4_dqs_c (c0_ddr4_dqs_c), + .c0_ddr4_dqs_t (c0_ddr4_dqs_t), + + .dBufAdr (dBufAdr), + .wrData (wrData), + .rdData (rdData), + .rdDataAddr (rdDataAddr), + .rdDataEn (rdDataEn), + .rdDataEnd (rdDataEnd), + .per_rd_done (per_rd_done), + .rmw_rd_done (rmw_rd_done), + .wrDataAddr (wrDataAddr), + .wrDataEn (wrDataEn), + + .mc_ACT_n (dllt_active ? dllt_mc_ACT_n : mc_ACT_n), + .mc_ADR (dllt_active ? dllt_mc_ADR : mc_ADR), + .mc_BA (dllt_active ? dllt_mc_BA : mc_BA), + .mc_BG (dllt_active ? dllt_mc_BG : mc_BG), + .mc_CKE (dllt_active ? dllt_mc_CKE : {8{1'b1}}), + .mc_CS_n (dllt_active ? dllt_mc_CS_n : mc_CS_n), + .mc_ODT (mc_ODT), + // CAS command slot select. Slot0 is enabled for example design. + .mcCasSlot (dllt_active ? 2'b0 : mcCasSlot), + // CAS slot 2 select. mcCasSlot2 serves a similar purpose as the mcCasSlot[1:0] signal, but mcCasSlot2 is used in timing + // critical logic in the Phy. Slot0 is enabled for example design. + .mcCasSlot2 (dllt_active ? 1'b0 : mcCasSlot2), + .mcRdCAS (dllt_active ? 1'b0 : mcRdCAS), + .mcWrCAS (dllt_active ? 1'b0 : mcWrCAS), + // Optional read command type indication. The winInjTxn signal is set to '0' for example design. + .winInjTxn ({1{1'b0}}), + // Optional read command type indication. The winRmw signal is set to '0' for example design. + .winRmw ({1{1'b0}}), + // Update VT Tracking. The gt_data_ready signal is set to '0' in this example design. + // This signal must be asserted periodically to keep the DQS Gate aligned as voltage and temperature drift. + // For more information, Refer to PG150 document. + .gt_data_ready (gt_data_ready), + .winBuf (winBuf), + .winRank (winRank), + .tCWL (tCWL), + // Debug Port + .dbg_bus (dbg_bus) + ); + `elsif XUPP3R_x4 + phy_ddr4 phy_ddr4_i( + .sys_rst (sys_rst), + .c0_sys_clk_p (c0_sys_clk_p), + .c0_sys_clk_n (c0_sys_clk_n), + + `ifdef ENABLE_DLL_TOGGLER + .c0_ddr4_ui_clk (ddr4_ui_clk), + .addn_ui_clkout1 (c0_ddr4_dll_off_clk), + `else + .c0_ddr4_ui_clk (c0_ddr4_clk), + `endif + .c0_ddr4_ui_clk_sync_rst (c0_ddr4_rst), + .c0_init_calib_complete (c0_init_calib_complete), + .dbg_clk (dbg_clk), + .c0_ddr4_act_n (c0_ddr4_act_n), + .c0_ddr4_adr (c0_ddr4_adr), + .c0_ddr4_ba (c0_ddr4_ba), + .c0_ddr4_bg (c0_ddr4_bg), + .c0_ddr4_cke (c0_ddr4_cke), + .c0_ddr4_odt (c0_ddr4_odt), + .c0_ddr4_cs_n (c0_ddr4_cs_n), + .c0_ddr4_ck_t (c0_ddr4_ck_t), + .c0_ddr4_ck_c (c0_ddr4_ck_c), + .c0_ddr4_reset_n (c0_ddr4_reset_n), + .c0_ddr4_parity (c0_ddr4_parity), + .c0_ddr4_dq (c0_ddr4_dq), + .c0_ddr4_dqs_c (c0_ddr4_dqs_c), + .c0_ddr4_dqs_t (c0_ddr4_dqs_t), + + .dBufAdr (dBufAdr), + .wrData (wrData), + .rdData (rdData), + .rdDataAddr (rdDataAddr), + .rdDataEn (rdDataEn), + .rdDataEnd (rdDataEnd), + .per_rd_done (per_rd_done), + .rmw_rd_done (rmw_rd_done), + .wrDataAddr (wrDataAddr), + .wrDataEn (wrDataEn), + + .mc_ACT_n (dllt_active ? dllt_mc_ACT_n : mc_ACT_n), + .mc_ADR (dllt_active ? dllt_mc_ADR : mc_ADR), + .mc_BA (dllt_active ? dllt_mc_BA : mc_BA), + .mc_BG (dllt_active ? dllt_mc_BG : mc_BG), + .mc_CKE (dllt_active ? dllt_mc_CKE : {8{1'b1}}), + .mc_CS_n (dllt_active ? dllt_mc_CS_n : mc_CS_n), + .mc_ODT (mc_ODT), + // CAS command slot select. Slot0 is enabled for example design. + .mcCasSlot (dllt_active ? 0 : mcCasSlot), + // CAS slot 2 select. mcCasSlot2 serves a similar purpose as the mcCasSlot[1:0] signal, but mcCasSlot2 is used in timing + // critical logic in the Phy. Slot0 is enabled for example design. + .mcCasSlot2 (dllt_active ? 0 : mcCasSlot2), + .mcRdCAS (dllt_active ? 0 : mcRdCAS), + .mcWrCAS (dllt_active ? 0 : mcWrCAS), + // Optional read command type indication. The winInjTxn signal is set to '0' for example design. + .winInjTxn ({1{1'b0}}), + // Optional read command type indication. The winRmw signal is set to '0' for example design. + .winRmw ({1{1'b0}}), + // Update VT Tracking. The gt_data_ready signal is set to '0' in this example design. + // This signal must be asserted periodically to keep the DQS Gate aligned as voltage and temperature drift. + // For more information, Refer to PG150 document. + .gt_data_ready (gt_data_ready), + .winBuf (winBuf), + .winRank (winRank), + .tCWL (tCWL), + // Debug Port + .dbg_bus (dbg_bus) + ); + `elsif XUPP3R_x8_1R_UDIMM + phy_ddr4_udimm phy_ddr4_i( + .sys_rst (sys_rst), + .c0_sys_clk_p (c0_sys_clk_p), + .c0_sys_clk_n (c0_sys_clk_n), + `ifdef ENABLE_DLL_TOGGLER + .c0_ddr4_ui_clk (ddr4_ui_clk), + .addn_ui_clkout1 (c0_ddr4_dll_off_clk), + `else + .c0_ddr4_ui_clk (c0_ddr4_clk), + `endif + .c0_ddr4_ui_clk_sync_rst (c0_ddr4_rst), + .c0_init_calib_complete (c0_init_calib_complete), + .dbg_clk (dbg_clk), + .c0_ddr4_act_n (c0_ddr4_act_n), + .c0_ddr4_adr (c0_ddr4_adr), + .c0_ddr4_ba (c0_ddr4_ba), + .c0_ddr4_bg (c0_ddr4_bg), + .c0_ddr4_cke (c0_ddr4_cke), + .c0_ddr4_odt (c0_ddr4_odt), + .c0_ddr4_cs_n (c0_ddr4_cs_n), + .c0_ddr4_ck_t (c0_ddr4_ck_t), + .c0_ddr4_ck_c (c0_ddr4_ck_c), + .c0_ddr4_reset_n (c0_ddr4_reset_n), + .wrDataMask (wrDataMask), + .c0_ddr4_dm_dbi_n (c0_ddr4_dm_dbi_n), + .c0_ddr4_dq (c0_ddr4_dq), + .c0_ddr4_dqs_c (c0_ddr4_dqs_c), + .c0_ddr4_dqs_t (c0_ddr4_dqs_t), + + .dBufAdr (dBufAdr), + .wrData (wrData), + .rdData (rdData), + .rdDataAddr (rdDataAddr), + .rdDataEn (rdDataEn), + .rdDataEnd (rdDataEnd), + .per_rd_done (per_rd_done), + .rmw_rd_done (rmw_rd_done), + .wrDataAddr (wrDataAddr), + .wrDataEn (wrDataEn), + + .mc_ACT_n (dllt_active ? dllt_mc_ACT_n : mc_ACT_n), + .mc_ADR (dllt_active ? dllt_mc_ADR : mc_ADR), + .mc_BA (dllt_active ? dllt_mc_BA : mc_BA), + .mc_BG (dllt_active ? dllt_mc_BG : mc_BG), + .mc_CKE (dllt_active ? dllt_mc_CKE : {8{1'b1}}), + .mc_CS_n (dllt_active ? dllt_mc_CS_n : mc_CS_n), + .mc_ODT (mc_ODT), + // CAS command slot select. Slot0 is enabled for example design. + .mcCasSlot (dllt_active ? 2'b0 : mcCasSlot), + // CAS slot 2 select. mcCasSlot2 serves a similar purpose as the mcCasSlot[1:0] signal, but mcCasSlot2 is used in timing + // critical logic in the Phy. Slot0 is enabled for example design. + .mcCasSlot2 (dllt_active ? 1'b0 : mcCasSlot2), + .mcRdCAS (dllt_active ? 1'b0 : mcRdCAS), + .mcWrCAS (dllt_active ? 1'b0 : mcWrCAS), + // Optional read command type indication. The winInjTxn signal is set to '0' for example design. + .winInjTxn ({1{1'b0}}), + // Optional read command type indication. The winRmw signal is set to '0' for example design. + .winRmw ({1{1'b0}}), + // Update VT Tracking. The gt_data_ready signal is set to '0' in this example design. + // This signal must be asserted periodically to keep the DQS Gate aligned as voltage and temperature drift. + // For more information, Refer to PG150 document. + .gt_data_ready (gt_data_ready), + .winBuf (winBuf), + .winRank (winRank), + .tCWL (tCWL), + // Debug Port + .dbg_bus (dbg_bus) + ); + `else + phy_ddr4 phy_ddr4_i( + .sys_rst (sys_rst), + .c0_sys_clk_p (c0_sys_clk_p), + .c0_sys_clk_n (c0_sys_clk_n), + + `ifdef ENABLE_DLL_TOGGLER + .c0_ddr4_ui_clk (ddr4_ui_clk), + .addn_ui_clkout1 (c0_ddr4_dll_off_clk), + `else + .c0_ddr4_ui_clk (c0_ddr4_clk), + `endif + .c0_ddr4_ui_clk_sync_rst (c0_ddr4_rst), + .c0_init_calib_complete (c0_init_calib_complete), + .dbg_clk (dbg_clk), + .c0_ddr4_act_n (c0_ddr4_act_n), + .c0_ddr4_adr (c0_ddr4_adr), + .c0_ddr4_ba (c0_ddr4_ba), + .c0_ddr4_bg (c0_ddr4_bg), + .c0_ddr4_cke (c0_ddr4_cke), + .c0_ddr4_odt (c0_ddr4_odt), + .c0_ddr4_cs_n (c0_ddr4_cs_n), + .c0_ddr4_ck_t (c0_ddr4_ck_t), + .c0_ddr4_ck_c (c0_ddr4_ck_c), + .c0_ddr4_reset_n (c0_ddr4_reset_n), + .wrDataMask (wrDataMask), + .c0_ddr4_dm_dbi_n (c0_ddr4_dm_dbi_n), + .c0_ddr4_dq (c0_ddr4_dq), + .c0_ddr4_dqs_c (c0_ddr4_dqs_c), + .c0_ddr4_dqs_t (c0_ddr4_dqs_t), + + .dBufAdr (dBufAdr), + .wrData (wrData), + .rdData (rdData), + .rdDataAddr (rdDataAddr), + .rdDataEn (rdDataEn), + .rdDataEnd (rdDataEnd), + .per_rd_done (per_rd_done), + .rmw_rd_done (rmw_rd_done), + .wrDataAddr (wrDataAddr), + .wrDataEn (wrDataEn), + + .mc_ACT_n (dllt_active ? dllt_mc_ACT_n : mc_ACT_n), + .mc_ADR (dllt_active ? dllt_mc_ADR : mc_ADR), + .mc_BA (dllt_active ? dllt_mc_BA : mc_BA), + .mc_BG (dllt_active ? dllt_mc_BG : mc_BG), + .mc_CKE (dllt_active ? dllt_mc_CKE : {8{1'b1}}), + .mc_CS_n (dllt_active ? dllt_mc_CS_n : mc_CS_n), + .mc_ODT (mc_ODT), + // CAS command slot select. Slot0 is enabled for example design. + .mcCasSlot (dllt_active ? 0 : mcCasSlot), + // CAS slot 2 select. mcCasSlot2 serves a similar purpose as the mcCasSlot[1:0] signal, but mcCasSlot2 is used in timing + // critical logic in the Phy. Slot0 is enabled for example design. + .mcCasSlot2 (dllt_active ? 0 : mcCasSlot2), + .mcRdCAS (dllt_active ? 0 : mcRdCAS), + .mcWrCAS (dllt_active ? 0 : mcWrCAS), + // Optional read command type indication. The winInjTxn signal is set to '0' for example design. + .winInjTxn ({1{1'b0}}), + // Optional read command type indication. The winRmw signal is set to '0' for example design. + .winRmw ({1{1'b0}}), + // Update VT Tracking. The gt_data_ready signal is set to '0' in this example design. + // This signal must be asserted periodically to keep the DQS Gate aligned as voltage and temperature drift. + // For more information, Refer to PG150 document. + .gt_data_ready (gt_data_ready), + .winBuf (winBuf), + .winRank (winRank), + .tCWL (tCWL), + // Debug Port + .dbg_bus (dbg_bus) + ); + `endif + + softmc_pipeline pipeline( + .clk(c0_ddr4_clk), + .rst(c0_ddr4_rst || user_rst), + + .softmc_end(softmc_fin), + .read_size(incoming_reads), + .read_seq_incoming(read_seq_incoming), + .buffer_space(buffer_space), + + .addr_out(fr_addr_in), + .valid_out(fr_valid_in), + .data_in(fr_data_out), + .valid_in(fr_valid_out), + .addr_in(fr_addr_out), + .ready_out(fr_ready_out), + + .ddr_write(ddr_write), + .ddr_read(ddr_read), + .ddr_pre(ddr_pre), + .ddr_act(ddr_act), + .ddr_ref(ddr_ref), + .ddr_sre(ddr_sre), + .ddr_srx(ddr_srx), + .ddr_zq(ddr_zq), + .ddr_nop(ddr_nop), + .ddr_ap(ddr_ap), + .ddr_pall(ddr_pall), + .ddr_half_bl(ddr_half_bl), + .ddr_bg(ddr_bg), + .ddr_bank(ddr_bank), + .ddr_col(ddr_col), + .ddr_row(ddr_row), + .ddr_wdata(ddr_wdata) + ); + + `ifdef ENABLE_DLL_TOGGLER + //BUFGMUX:GeneralClockMuxBuffer + //UltraScale + //XilinxHDLLibrariesGuide, version2014.4 + BUFGMUX#(.CLK_SEL_TYPE("SYNC") //ASYNC,SYNC + )BUFGMUX_inst( + .O(c0_ddr4_clk), //1-bitoutput:Clockoutput + .I0(ddr4_ui_clk), //1-bitinput:Clockinput(S=0) + .I1(c0_ddr4_dll_off_clk), //1-bitinput:Clockinput(S=1) + .S(clk_sel) //1-bitinput:Clockselect + ); + //End of BUFGMUX_inst instantiation + `endif + + + wire frontend_ready; + + frontend #(.SIM_MEM(SIM)) frontend( + .clk(c0_ddr4_clk), + .rst(c0_ddr4_rst), + + .init_calib_complete(c0_init_calib_complete_r), + .softmc_fin(softmc_fin), + .user_rst(user_rst), + + .dllt_begin(toggle_dll), + + // indicates read_back unit is ready for the next iseq + .frontend_ready(frontend_ready), + + // frontend <-> fetch stage if + .addr_in(fr_addr_in), + .valid_in(fr_valid_in), + .data_out(fr_data_out), + .valid_out(fr_valid_out), + .addr_out(fr_addr_out), + .ready_in(fr_ready_out), + + // frontend <-> xdma interface + .h2c_tdata_0(m_axis_h2c_tdata_0), + .h2c_tlast_0(m_axis_h2c_tlast_0), + .h2c_tvalid_0(m_axis_h2c_tvalid_0), + .h2c_tready_0(m_axis_h2c_tready_0), + .h2c_tkeep_0(m_axis_h2c_tkeep_0), + + .per_rd_init(per_rd_init), + .per_zq_init(per_zq_init), + .per_ref_init(per_ref_init), + .rbe_switch_mode(rbe_switch_mode) + ); + + ddr4_adapter#( + `ifdef XUPP3R + `ifdef XUPP3R_x8_1R_UDIMM + .DQ_WIDTH(64) + `else + .DQ_WIDTH(72) + `endif + `endif + ) ddr4_adapter + ( + .clk(c0_ddr4_clk), + .rst(c0_ddr4_rst || user_rst), + .init_calib_complete(c0_init_calib_complete_r), + //.io_config_strobe, + //.io_config, + .dBufAdr(dBufAdr), // Reserved. Should be tied low. + .wrData(wrData), // DRAM write data. There are 8 bits for each DQ lane on the DRAM bus. + .wrDataMask(wrDataMask),// DRAM write DM/DBI port.There is one bit for each byte of the wrData port. + .wrDataEn(wrDataEn), // Write data Enable. The Phy will assert this port for one cycle for each write CAS command. + .mc_ACT_n(mc_ACT_n), // DRAM ACT_n command signal for four DRAM clock cycles. + .mc_ADR(mc_ADR), // DRAM address. There are 8 bits in the fabric interface for each address bit on the DRAM bus. + .mc_BA(mc_BA), // DRAM bank address. 8 bits for each DRAM bank address. + .mc_BG(mc_BG), // DRAM bank group address. + .mc_CS_n(mc_CS_n), // DRAM CS_n + //.mc_ODT(mc_ODT), // DRAM ODT + .mcRdCAS(mcRdCAS), // Read CAS command issued. + .mcWrCAS(mcWrCAS), // Write CAS command issued. + .winRank(winRank), // Target rank for CAS commands. This value indicates which rank a CAS command is issued to. + .winBuf(winBuf), // Optional control signal. When either mcRdCAS or mcWrCAS is asserted, the Phy will store the value on the winBuf signal. + //.rdData(rdData), // DRAM read data. + .rdDataEn(rdDataEn), // Read data valid. This signal asserts for one fabric cycle for each completed read operation. + .rdDataEnd(rdDataEnd), // Unused. Tied high. + .mcCasSlot(mcCasSlot), + .mcCasSlot2(mcCasSlot2), + .gt_data_ready(gt_data_ready), + .ddr_write(ddr_write), + .ddr_read(ddr_read), + .ddr_pre(ddr_pre), + .ddr_act(ddr_act), + .ddr_ref(ddr_ref), + .ddr_zq(ddr_zq), + .ddr_nop(ddr_nop), + .ddr_ap(ddr_ap), + .ddr_pall(ddr_pall), + .ddr_half_bl(ddr_half_bl), + .ddr_bg(ddr_bg), + .ddr_bank(ddr_bank), + .ddr_col(ddr_col), + .ddr_row(ddr_row), + .ddr_wdata(ddr_wdata), + + .ddr_maint_read(per_rd_init) + ); + `ifdef XUPP3R_x8 + localparam ODTWRDEL = 5'd9; + localparam ODTWRDUR = 4'd6; + localparam ODTWRODEL = 5'd9; + localparam ODTWRODUR = 4'd6; + localparam ODTRDDEL = 5'd10; + localparam ODTRDDUR = 4'd6; + localparam ODTRDODEL = 5'd9; + localparam ODTRDODUR = 4'd6; + localparam ODTNOP = 16'h0000; + localparam ODTWR = 16'h0021; + localparam ODTRD = 16'h0012; + `elsif XUPP3R_x8_1R_UDIMM + localparam ODTWRDEL = 5'd9; + localparam ODTWRDUR = 4'd6; + localparam ODTWRODEL = 5'd9; + localparam ODTWRODUR = 4'd6; + localparam ODTRDDEL = 5'd9; + localparam ODTRDDUR = 4'd6; + localparam ODTRDODEL = 5'd9; + localparam ODTRDODUR = 4'd6; + localparam ODTNOP = 16'h0000; + localparam ODTWR = 16'h0001; + localparam ODTRD = 16'h0000; + `else + localparam ODTWRDEL = 5'd11; + localparam ODTWRDUR = 4'd6; + localparam ODTWRODEL = 5'd9; + localparam ODTWRODUR = 4'd6; + localparam ODTRDDEL = 5'd11; + localparam ODTRDDUR = 4'd6; + localparam ODTRDODEL = 5'd9; + localparam ODTRDODUR = 4'd6; + localparam ODTNOP = 16'h0000; + localparam ODTWR = 16'h0001; + localparam ODTRD = 16'h0000; + `endif + + wire tranSentC; + assign tranSentC = mcRdCAS | mcWrCAS; + + //synthesis translate_on + //******************************************************************************* + ddr4_mc_odt # ( + .ODTWR (ODTWR) + ,.ODTWRDEL (ODTWRDEL) + ,.ODTWRDUR (ODTWRDUR) + ,.ODTWRODEL (ODTWRODEL) + ,.ODTWRODUR (ODTWRODUR) + + ,.ODTRD (ODTRD) + ,.ODTRDDEL (ODTRDDEL) + ,.ODTRDDUR (ODTRDDUR) + ,.ODTRDODEL (ODTRDODEL) + ,.ODTRDODUR (ODTRDODUR) + + ,.ODTNOP (ODTNOP) + ,.ODTBITS (`ODT_WIDTH) + ,.TCQ (0.1) + )u_ddr_tb_odt( + .clk (c0_ddr4_clk) + ,.rst (c0_ddr4_rst) + ,.mc_ODT (mc_ODT) + ,.casSlot (mcCasSlot) + ,.casSlot2 (mcCasSlot2) + ,.rank (winRank) + ,.winRead (mcRdCAS) + ,.winWrite (mcWrCAS) + ,.tranSentC (tranSentC) + ); + + wire sys_clk, sys_clk_gt; + wire [2:0] msi_vector_width; + wire msi_enable; + wire user_lnk_up, usr_irq_req, usr_irq_ack; + `ifdef XUPP3R + IBUFDS_GTE4 refclk_ibuf (.O(sys_clk_gt), .ODIV2(sys_clk), .I(clk_ref_p), .CEB(1'b0), .IB(clk_ref_n)); + `else + IBUFDS_GTE3 # (.REFCLK_HROW_CK_SEL(2'b01)) refclk_ibuf (.O(sys_clk_gt), .ODIV2(sys_clk), .I(clk_ref_p), .CEB(1'b0), .IB(clk_ref_n)); + `endif + wire axi_clk, axi_rst; + + xdma xdma_i + ( + //---------------------------------------------------------------------------------------// + // PCI Express (pci_exp) Interface // + //---------------------------------------------------------------------------------------// + .sys_rst_n ( pcie_rst ), + .sys_clk ( sys_clk ), + .sys_clk_gt ( sys_clk_gt), + + // Tx + .pci_exp_txn ( pci_exp_txn ), + .pci_exp_txp ( pci_exp_txp ), + + // Rx + .pci_exp_rxn ( pci_exp_rxn ), + .pci_exp_rxp ( pci_exp_rxp ), + + // AXI streaming ports + .s_axis_c2h_tdata_0(xdma_c2h_tdata_0), + .s_axis_c2h_tlast_0(xdma_c2h_tlast_0), + .s_axis_c2h_tvalid_0(xdma_c2h_tvalid_0), + .s_axis_c2h_tready_0(xdma_c2h_tready_0), + .s_axis_c2h_tkeep_0(xdma_c2h_tkeep_0), + .m_axis_h2c_tdata_0(xdma_h2c_tdata_0), + .m_axis_h2c_tlast_0(xdma_h2c_tlast_0), + .m_axis_h2c_tvalid_0(xdma_h2c_tvalid_0), + .m_axis_h2c_tready_0(xdma_h2c_tready_0), + .m_axis_h2c_tkeep_0(xdma_h2c_tkeep_0), + + .usr_irq_req (1'b0), + .usr_irq_ack (usr_irq_ack), + .msi_enable (msi_enable), + .msi_vector_width (msi_vector_width), + + + // Config managemnet interface + .cfg_mgmt_addr ( 19'b0 ), + .cfg_mgmt_write ( 1'b0 ), + .cfg_mgmt_write_data ( 32'b0 ), + .cfg_mgmt_byte_enable ( 4'b0 ), + .cfg_mgmt_read ( 1'b0 ), + .cfg_mgmt_read_data (), + .cfg_mgmt_read_write_done (), + `ifndef XUPP3R + .cfg_mgmt_type1_cfg_reg_access ( 1'b0 ), + //---------- Shared Logic Internal ------------------------- + .int_qpll1lock_out ( ), + .int_qpll1outrefclk_out ( ), + .int_qpll1outclk_out ( ), + `endif + + //-- AXI Global + .axi_aclk (axi_clk), // AXI i-face clock driven from pcie clk + .axi_aresetn (axi_rst), // reset synchronous to axi_clk + + .user_lnk_up ( user_lnk_up ) + ); + + // Clock converter for the c2h interface + axis_clock_converter axis_clk_conv_i0 + ( + .s_axis_tvalid(s_axis_c2h_tvalid_0), + .s_axis_tlast(s_axis_c2h_tlast_0), + .s_axis_tdata(s_axis_c2h_tdata_0), + .s_axis_tkeep(s_axis_c2h_tkeep_0), + .s_axis_tready(s_axis_c2h_tready_0), + .m_axis_tvalid(xdma_c2h_tvalid_0), + .m_axis_tlast(xdma_c2h_tlast_0), + .m_axis_tdata(xdma_c2h_tdata_0), + .m_axis_tkeep(xdma_c2h_tkeep_0), + .m_axis_tready(xdma_c2h_tready_0), + .s_axis_aresetn(~c0_ddr4_rst), + .s_axis_aclk(c0_ddr4_clk), + .m_axis_aresetn(axi_rst), + .m_axis_aclk(axi_clk) + ); + + // Clock converter for the h2c interface + axis_clock_converter axis_clk_conv_i1 + ( + .m_axis_tvalid(m_axis_h2c_tvalid_0), + .m_axis_tlast(m_axis_h2c_tlast_0), + .m_axis_tdata(m_axis_h2c_tdata_0), + .m_axis_tkeep(m_axis_h2c_tkeep_0), + .m_axis_tready(m_axis_h2c_tready_0), + .s_axis_tvalid(xdma_h2c_tvalid_0), + .s_axis_tlast(xdma_h2c_tlast_0), + .s_axis_tdata(xdma_h2c_tdata_0), + .s_axis_tkeep(xdma_h2c_tkeep_0), + .s_axis_tready(xdma_h2c_tready_0), + .m_axis_aresetn(~c0_ddr4_rst), + .m_axis_aclk(c0_ddr4_clk), + .s_axis_aresetn(axi_rst), + .s_axis_aclk(axi_clk) + ); + + readback_engine rbe( + + // common signals + .clk(c0_ddr4_clk), + .rst(c0_ddr4_rst || user_rst), + + // other ctrl signals + .flush(frontend_ready), + .switch_mode(rbe_switch_mode), + .read_seq_incoming(read_seq_incoming), // next few instructions will read from DRAM + .incoming_reads(incoming_reads), // how many reads next few instructions will issue + .buffer_space(buffer_space), // remaining buffer size + // DRAM <-> engine if + .rd_data(rdData), + .rd_valid(rdDataEn), + + // rbe <-> rf interface + .ddr_wdata(ddr_wdata), + + .per_rd_init(per_rd_init), + .per_zq_init(per_zq_init), + .per_ref_init(per_ref_init), + + // rbe <-> xdma if + .c2h_tdata_0(s_axis_c2h_tdata_0), + .c2h_tlast_0(s_axis_c2h_tlast_0), + .c2h_tvalid_0(s_axis_c2h_tvalid_0), + .c2h_tready_0(s_axis_c2h_tready_0), + .c2h_tkeep_0(s_axis_c2h_tkeep_0) + + ); + + `ifdef ENABLE_DLL_TOGGLER + dll_toggler dllt + ( + .clk(c0_ddr4_clk), + .rst(c0_ddr4_rst || user_rst || ~c0_init_calib_complete_r), + .toggle_valid(toggle_dll), + .mc_ACT_n(dllt_mc_ACT_n), // DRAM ACT_n command signal for four DRAM clock cycles. + .mc_ADR(dllt_mc_ADR), // DRAM address. There are 8 bits in the fabric interface for each address bit on the DRAM bus. + .mc_BA(dllt_mc_BA), // DRAM bank address. 8 bits for each DRAM bank address. + .mc_BG(dllt_mc_BG), // DRAM bank group address. + .mc_CS_n(dllt_mc_CS_n), // DRAM CS_n + .mc_CKE(dllt_mc_CKE), + .clk_sel(clk_sel), + .dllt_done(dllt_done) + ); + `endif +endmodule |