diff options
Diffstat (limited to 'QW/client/r_drawa.s')
| -rw-r--r-- | QW/client/r_drawa.s | 838 |
1 files changed, 838 insertions, 0 deletions
diff --git a/QW/client/r_drawa.s b/QW/client/r_drawa.s new file mode 100644 index 0000000..3cb2239 --- /dev/null +++ b/QW/client/r_drawa.s @@ -0,0 +1,838 @@ +/* +Copyright (C) 1996-1997 Id Software, Inc. + +This program is free software; you can redistribute it and/or +modify it under the terms of the GNU General Public License +as published by the Free Software Foundation; either version 2 +of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +*/ +// +// r_drawa.s +// x86 assembly-language edge clipping and emission code +// + +#include "asm_i386.h" +#include "quakeasm.h" +#include "asm_draw.h" +#include "d_ifacea.h" + +#if id386 + +// !!! if these are changed, they must be changed in r_draw.c too !!! +#define FULLY_CLIPPED_CACHED 0x80000000 +#define FRAMECOUNT_MASK 0x7FFFFFFF + + .data + +Ld0: .single 0.0 +Ld1: .single 0.0 +Lstack: .long 0 +Lfp_near_clip: .single NEAR_CLIP +Lceilv0: .long 0 +Lv: .long 0 +Lu0: .long 0 +Lv0: .long 0 +Lzi0: .long 0 + + .text + +//---------------------------------------------------------------------- +// edge clipping code +//---------------------------------------------------------------------- + +#define pv0 4+12 +#define pv1 8+12 +#define clip 12+12 + + .align 4 +.globl C(R_ClipEdge) +C(R_ClipEdge): + pushl %esi // preserve register variables + pushl %edi + pushl %ebx + movl %esp,Lstack // for clearing the stack later + +// float d0, d1, f; +// mvertex_t clipvert; + + movl clip(%esp),%ebx + movl pv0(%esp),%esi + movl pv1(%esp),%edx + +// if (clip) +// { + testl %ebx,%ebx + jz Lemit + +// do +// { + +Lcliploop: + +// d0 = DotProduct (pv0->position, clip->normal) - clip->dist; +// d1 = DotProduct (pv1->position, clip->normal) - clip->dist; + flds mv_position+0(%esi) + fmuls cp_normal+0(%ebx) + flds mv_position+4(%esi) + fmuls cp_normal+4(%ebx) + flds mv_position+8(%esi) + fmuls cp_normal+8(%ebx) + fxch %st(1) + faddp %st(0),%st(2) // d0mul2 | d0add0 + + flds mv_position+0(%edx) + fmuls cp_normal+0(%ebx) + flds mv_position+4(%edx) + fmuls cp_normal+4(%ebx) + flds mv_position+8(%edx) + fmuls cp_normal+8(%ebx) + fxch %st(1) + faddp %st(0),%st(2) // d1mul2 | d1add0 | d0mul2 | d0add0 + fxch %st(3) // d0add0 | d1add0 | d0mul2 | d1mul2 + + faddp %st(0),%st(2) // d1add0 | dot0 | d1mul2 + faddp %st(0),%st(2) // dot0 | dot1 + + fsubs cp_dist(%ebx) // d0 | dot1 + fxch %st(1) // dot1 | d0 + fsubs cp_dist(%ebx) // d1 | d0 + fxch %st(1) + fstps Ld0 + fstps Ld1 + +// if (d0 >= 0) +// { + movl Ld0,%eax + movl Ld1,%ecx + orl %eax,%ecx + js Lp2 + +// both points are unclipped + +Lcontinue: + +// +// R_ClipEdge (&clipvert, pv1, clip->next); +// return; +// } +// } while ((clip = clip->next) != NULL); + movl cp_next(%ebx),%ebx + testl %ebx,%ebx + jnz Lcliploop + +// } + +//// add the edge +// R_EmitEdge (pv0, pv1); +Lemit: + +// +// set integer rounding to ceil mode, set to single precision +// +// FIXME: do away with by manually extracting integers from floats? +// FIXME: set less often + fldcw ceil_cw + +// edge_t *edge, *pcheck; +// int u_check; +// float u, u_step; +// vec3_t local, transformed; +// float *world; +// int v, v2, ceilv0; +// float scale, lzi0, u0, v0; +// int side; + +// if (r_lastvertvalid) +// { + cmpl $0,C(r_lastvertvalid) + jz LCalcFirst + +// u0 = r_u1; +// v0 = r_v1; +// lzi0 = r_lzi1; +// ceilv0 = r_ceilv1; + movl C(r_lzi1),%eax + movl C(r_u1),%ecx + movl %eax,Lzi0 + movl %ecx,Lu0 + movl C(r_v1),%ecx + movl C(r_ceilv1),%eax + movl %ecx,Lv0 + movl %eax,Lceilv0 + jmp LCalcSecond + +// } + +LCalcFirst: + +// else +// { +// world = &pv0->position[0]; + + call LTransformAndProject // v0 | lzi0 | u0 + + fsts Lv0 + fxch %st(2) // u0 | lzi0 | v0 + fstps Lu0 // lzi0 | v0 + fstps Lzi0 // v0 + +// ceilv0 = (int)(v0 - 2000) + 2000; // ceil(v0); + fistpl Lceilv0 + +// } + +LCalcSecond: + +// world = &pv1->position[0]; + movl %edx,%esi + + call LTransformAndProject // v1 | lzi1 | u1 + + flds Lu0 // u0 | v1 | lzi1 | u1 + fxch %st(3) // u1 | v1 | lzi1 | u0 + flds Lzi0 // lzi0 | u1 | v1 | lzi1 | u0 + fxch %st(3) // lzi1 | u1 | v1 | lzi0 | u0 + flds Lv0 // v0 | lzi1 | u1 | v1 | lzi0 | u0 + fxch %st(3) // v1 | lzi1 | u1 | v0 | lzi0 | u0 + +// r_ceilv1 = (int)(r_v1 - 2000) + 2000; // ceil(r_v1); + fistl C(r_ceilv1) + + fldcw single_cw // put back normal floating-point state + + fsts C(r_v1) + fxch %st(4) // lzi0 | lzi1 | u1 | v0 | v1 | u0 + +// if (r_lzi1 > lzi0) +// lzi0 = r_lzi1; + fcom %st(1) + fnstsw %ax + testb $1,%ah + jz LP0 + fstp %st(0) + fld %st(0) +LP0: + + fxch %st(1) // lzi1 | lzi0 | u1 | v0 | v1 | u0 + fstps C(r_lzi1) // lzi0 | u1 | v0 | v1 | u0 + fxch %st(1) + fsts C(r_u1) + fxch %st(1) + +// if (lzi0 > r_nearzi) // for mipmap finding +// r_nearzi = lzi0; + fcoms C(r_nearzi) + fnstsw %ax + testb $0x45,%ah + jnz LP1 + fsts C(r_nearzi) +LP1: + +// // for right edges, all we want is the effect on 1/z +// if (r_nearzionly) +// return; + movl C(r_nearzionly),%eax + testl %eax,%eax + jz LP2 +LPop5AndDone: + movl C(cacheoffset),%eax + movl C(r_framecount),%edx + cmpl $0x7FFFFFFF,%eax + jz LDoPop + andl $(FRAMECOUNT_MASK),%edx + orl $(FULLY_CLIPPED_CACHED),%edx + movl %edx,C(cacheoffset) + +LDoPop: + fstp %st(0) // u1 | v0 | v1 | u0 + fstp %st(0) // v0 | v1 | u0 + fstp %st(0) // v1 | u0 + fstp %st(0) // u0 + fstp %st(0) + jmp Ldone + +LP2: + +// // create the edge +// if (ceilv0 == r_ceilv1) +// return; // horizontal edge + movl Lceilv0,%ebx + movl C(edge_p),%edi + movl C(r_ceilv1),%ecx + movl %edi,%edx + movl C(r_pedge),%esi + addl $(et_size),%edx + cmpl %ecx,%ebx + jz LPop5AndDone + + movl C(r_pedge),%eax + movl %eax,et_owner(%edi) + +// side = ceilv0 > r_ceilv1; +// +// edge->nearzi = lzi0; + fstps et_nearzi(%edi) // u1 | v0 | v1 | u0 + +// if (side == 1) +// { + jc LSide0 + +LSide1: + +// // leading edge (go from p2 to p1) + +// u_step = ((u0 - r_u1) / (v0 - r_v1)); + fsubrp %st(0),%st(3) // v0 | v1 | u0-u1 + fsub %st(1),%st(0) // v0-v1 | v1 | u0-u1 + fdivrp %st(0),%st(2) // v1 | ustep + +// r_emitted = 1; + movl $1,C(r_emitted) + +// edge = edge_p++; + movl %edx,C(edge_p) + +// pretouch next edge + movl (%edx),%eax + +// v2 = ceilv0 - 1; +// v = r_ceilv1; + movl %ecx,%eax + leal -1(%ebx),%ecx + movl %eax,%ebx + +// edge->surfs[0] = 0; +// edge->surfs[1] = surface_p - surfaces; + movl C(surface_p),%eax + movl C(surfaces),%esi + subl %edx,%edx + subl %esi,%eax + shrl $(SURF_T_SHIFT),%eax + movl %edx,et_surfs(%edi) + movl %eax,et_surfs+2(%edi) + + subl %esi,%esi + +// u = r_u1 + ((float)v - r_v1) * u_step; + movl %ebx,Lv + fildl Lv // v | v1 | ustep + fsubp %st(0),%st(1) // v-v1 | ustep + fmul %st(1),%st(0) // (v-v1)*ustep | ustep + fadds C(r_u1) // u | ustep + + jmp LSideDone + +// } + +LSide0: + +// else +// { +// // trailing edge (go from p1 to p2) + +// u_step = ((r_u1 - u0) / (r_v1 - v0)); + fsub %st(3),%st(0) // u1-u0 | v0 | v1 | u0 + fxch %st(2) // v1 | v0 | u1-u0 | u0 + fsub %st(1),%st(0) // v1-v0 | v0 | u1-u0 | u0 + fdivrp %st(0),%st(2) // v0 | ustep | u0 + +// r_emitted = 1; + movl $1,C(r_emitted) + +// edge = edge_p++; + movl %edx,C(edge_p) + +// pretouch next edge + movl (%edx),%eax + +// v = ceilv0; +// v2 = r_ceilv1 - 1; + decl %ecx + +// edge->surfs[0] = surface_p - surfaces; +// edge->surfs[1] = 0; + movl C(surface_p),%eax + movl C(surfaces),%esi + subl %edx,%edx + subl %esi,%eax + shrl $(SURF_T_SHIFT),%eax + movl %edx,et_surfs+2(%edi) + movl %eax,et_surfs(%edi) + + movl $1,%esi + +// u = u0 + ((float)v - v0) * u_step; + movl %ebx,Lv + fildl Lv // v | v0 | ustep | u0 + fsubp %st(0),%st(1) // v-v0 | ustep | u0 + fmul %st(1),%st(0) // (v-v0)*ustep | ustep | u0 + faddp %st(0),%st(2) // ustep | u + fxch %st(1) // u | ustep + +// } + +LSideDone: + +// edge->u_step = u_step*0x100000; +// edge->u = u*0x100000 + 0xFFFFF; + + fmuls fp_1m // u*0x100000 | ustep + fxch %st(1) // ustep | u*0x100000 + fmuls fp_1m // ustep*0x100000 | u*0x100000 + fxch %st(1) // u*0x100000 | ustep*0x100000 + fadds fp_1m_minus_1 // u*0x100000 + 0xFFFFF | ustep*0x100000 + fxch %st(1) // ustep*0x100000 | u*0x100000 + 0xFFFFF + fistpl et_u_step(%edi) // u*0x100000 + 0xFFFFF + fistpl et_u(%edi) + +// // we need to do this to avoid stepping off the edges if a very nearly +// // horizontal edge is less than epsilon above a scan, and numeric error +// // causes it to incorrectly extend to the scan, and the extension of the +// // line goes off the edge of the screen +// // FIXME: is this actually needed? +// if (edge->u < r_refdef.vrect_x_adj_shift20) +// edge->u = r_refdef.vrect_x_adj_shift20; +// if (edge->u > r_refdef.vrectright_adj_shift20) +// edge->u = r_refdef.vrectright_adj_shift20; + movl et_u(%edi),%eax + movl C(r_refdef)+rd_vrect_x_adj_shift20,%edx + cmpl %edx,%eax + jl LP4 + movl C(r_refdef)+rd_vrectright_adj_shift20,%edx + cmpl %edx,%eax + jng LP5 +LP4: + movl %edx,et_u(%edi) + movl %edx,%eax +LP5: + +// // sort the edge in normally +// u_check = edge->u; +// +// if (edge->surfs[0]) +// u_check++; // sort trailers after leaders + addl %esi,%eax + +// if (!newedges[v] || newedges[v]->u >= u_check) +// { + movl C(newedges)(,%ebx,4),%esi + testl %esi,%esi + jz LDoFirst + cmpl %eax,et_u(%esi) + jl LNotFirst +LDoFirst: + +// edge->next = newedges[v]; +// newedges[v] = edge; + movl %esi,et_next(%edi) + movl %edi,C(newedges)(,%ebx,4) + + jmp LSetRemove + +// } + +LNotFirst: + +// else +// { +// pcheck = newedges[v]; +// +// while (pcheck->next && pcheck->next->u < u_check) +// pcheck = pcheck->next; +LFindInsertLoop: + movl %esi,%edx + movl et_next(%esi),%esi + testl %esi,%esi + jz LInsertFound + cmpl %eax,et_u(%esi) + jl LFindInsertLoop + +LInsertFound: + +// edge->next = pcheck->next; +// pcheck->next = edge; + movl %esi,et_next(%edi) + movl %edi,et_next(%edx) + +// } + +LSetRemove: + +// edge->nextremove = removeedges[v2]; +// removeedges[v2] = edge; + movl C(removeedges)(,%ecx,4),%eax + movl %edi,C(removeedges)(,%ecx,4) + movl %eax,et_nextremove(%edi) + +Ldone: + movl Lstack,%esp // clear temporary variables from stack + + popl %ebx // restore register variables + popl %edi + popl %esi + ret + +// at least one point is clipped + +Lp2: + testl %eax,%eax + jns Lp1 + +// else +// { +// // point 0 is clipped + +// if (d1 < 0) +// { + movl Ld1,%eax + testl %eax,%eax + jns Lp3 + +// // both points are clipped +// // we do cache fully clipped edges +// if (!leftclipped) + movl C(r_leftclipped),%eax + movl C(r_pedge),%ecx + testl %eax,%eax + jnz Ldone + +// r_pedge->framecount = r_framecount; + movl C(r_framecount),%eax + andl $(FRAMECOUNT_MASK),%eax + orl $(FULLY_CLIPPED_CACHED),%eax + movl %eax,C(cacheoffset) + +// return; + jmp Ldone + +// } + +Lp1: + +// // point 0 is unclipped +// if (d1 >= 0) +// { +// // both points are unclipped +// continue; + +// // only point 1 is clipped + +// f = d0 / (d0 - d1); + flds Ld0 + flds Ld1 + fsubr %st(1),%st(0) + +// // we don't cache partially clipped edges + movl $0x7FFFFFFF,C(cacheoffset) + + fdivrp %st(0),%st(1) + + subl $(mv_size),%esp // allocate space for clipvert + +// clipvert.position[0] = pv0->position[0] + +// f * (pv1->position[0] - pv0->position[0]); +// clipvert.position[1] = pv0->position[1] + +// f * (pv1->position[1] - pv0->position[1]); +// clipvert.position[2] = pv0->position[2] + +// f * (pv1->position[2] - pv0->position[2]); + flds mv_position+8(%edx) + fsubs mv_position+8(%esi) + flds mv_position+4(%edx) + fsubs mv_position+4(%esi) + flds mv_position+0(%edx) + fsubs mv_position+0(%esi) // 0 | 1 | 2 + +// replace pv1 with the clip point + movl %esp,%edx + movl cp_leftedge(%ebx),%eax + testb %al,%al + + fmul %st(3),%st(0) + fxch %st(1) // 1 | 0 | 2 + fmul %st(3),%st(0) + fxch %st(2) // 2 | 0 | 1 + fmulp %st(0),%st(3) // 0 | 1 | 2 + fadds mv_position+0(%esi) + fxch %st(1) // 1 | 0 | 2 + fadds mv_position+4(%esi) + fxch %st(2) // 2 | 0 | 1 + fadds mv_position+8(%esi) + fxch %st(1) // 0 | 2 | 1 + fstps mv_position+0(%esp) // 2 | 1 + fstps mv_position+8(%esp) // 1 + fstps mv_position+4(%esp) + +// if (clip->leftedge) +// { + jz Ltestright + +// r_leftclipped = true; +// r_leftexit = clipvert; + movl $1,C(r_leftclipped) + movl mv_position+0(%esp),%eax + movl %eax,C(r_leftexit)+mv_position+0 + movl mv_position+4(%esp),%eax + movl %eax,C(r_leftexit)+mv_position+4 + movl mv_position+8(%esp),%eax + movl %eax,C(r_leftexit)+mv_position+8 + + jmp Lcontinue + +// } + +Ltestright: +// else if (clip->rightedge) +// { + testb %ah,%ah + jz Lcontinue + +// r_rightclipped = true; +// r_rightexit = clipvert; + movl $1,C(r_rightclipped) + movl mv_position+0(%esp),%eax + movl %eax,C(r_rightexit)+mv_position+0 + movl mv_position+4(%esp),%eax + movl %eax,C(r_rightexit)+mv_position+4 + movl mv_position+8(%esp),%eax + movl %eax,C(r_rightexit)+mv_position+8 + +// } +// +// R_ClipEdge (pv0, &clipvert, clip->next); +// return; +// } + jmp Lcontinue + +// } + +Lp3: + +// // only point 0 is clipped +// r_lastvertvalid = false; + + movl $0,C(r_lastvertvalid) + +// f = d0 / (d0 - d1); + flds Ld0 + flds Ld1 + fsubr %st(1),%st(0) + +// // we don't cache partially clipped edges + movl $0x7FFFFFFF,C(cacheoffset) + + fdivrp %st(0),%st(1) + + subl $(mv_size),%esp // allocate space for clipvert + +// clipvert.position[0] = pv0->position[0] + +// f * (pv1->position[0] - pv0->position[0]); +// clipvert.position[1] = pv0->position[1] + +// f * (pv1->position[1] - pv0->position[1]); +// clipvert.position[2] = pv0->position[2] + +// f * (pv1->position[2] - pv0->position[2]); + flds mv_position+8(%edx) + fsubs mv_position+8(%esi) + flds mv_position+4(%edx) + fsubs mv_position+4(%esi) + flds mv_position+0(%edx) + fsubs mv_position+0(%esi) // 0 | 1 | 2 + + movl cp_leftedge(%ebx),%eax + testb %al,%al + + fmul %st(3),%st(0) + fxch %st(1) // 1 | 0 | 2 + fmul %st(3),%st(0) + fxch %st(2) // 2 | 0 | 1 + fmulp %st(0),%st(3) // 0 | 1 | 2 + fadds mv_position+0(%esi) + fxch %st(1) // 1 | 0 | 2 + fadds mv_position+4(%esi) + fxch %st(2) // 2 | 0 | 1 + fadds mv_position+8(%esi) + fxch %st(1) // 0 | 2 | 1 + fstps mv_position+0(%esp) // 2 | 1 + fstps mv_position+8(%esp) // 1 + fstps mv_position+4(%esp) + +// replace pv0 with the clip point + movl %esp,%esi + +// if (clip->leftedge) +// { + jz Ltestright2 + +// r_leftclipped = true; +// r_leftenter = clipvert; + movl $1,C(r_leftclipped) + movl mv_position+0(%esp),%eax + movl %eax,C(r_leftenter)+mv_position+0 + movl mv_position+4(%esp),%eax + movl %eax,C(r_leftenter)+mv_position+4 + movl mv_position+8(%esp),%eax + movl %eax,C(r_leftenter)+mv_position+8 + + jmp Lcontinue + +// } + +Ltestright2: +// else if (clip->rightedge) +// { + testb %ah,%ah + jz Lcontinue + +// r_rightclipped = true; +// r_rightenter = clipvert; + movl $1,C(r_rightclipped) + movl mv_position+0(%esp),%eax + movl %eax,C(r_rightenter)+mv_position+0 + movl mv_position+4(%esp),%eax + movl %eax,C(r_rightenter)+mv_position+4 + movl mv_position+8(%esp),%eax + movl %eax,C(r_rightenter)+mv_position+8 + +// } + jmp Lcontinue + +// %esi = vec3_t point to transform and project +// %edx preserved +LTransformAndProject: + +// // transform and project +// VectorSubtract (world, modelorg, local); + flds mv_position+0(%esi) + fsubs C(modelorg)+0 + flds mv_position+4(%esi) + fsubs C(modelorg)+4 + flds mv_position+8(%esi) + fsubs C(modelorg)+8 + fxch %st(2) // local[0] | local[1] | local[2] + +// TransformVector (local, transformed); +// +// if (transformed[2] < NEAR_CLIP) +// transformed[2] = NEAR_CLIP; +// +// lzi0 = 1.0 / transformed[2]; + fld %st(0) // local[0] | local[0] | local[1] | local[2] + fmuls C(vpn)+0 // zm0 | local[0] | local[1] | local[2] + fld %st(1) // local[0] | zm0 | local[0] | local[1] | + // local[2] + fmuls C(vright)+0 // xm0 | zm0 | local[0] | local[1] | local[2] + fxch %st(2) // local[0] | zm0 | xm0 | local[1] | local[2] + fmuls C(vup)+0 // ym0 | zm0 | xm0 | local[1] | local[2] + fld %st(3) // local[1] | ym0 | zm0 | xm0 | local[1] | + // local[2] + fmuls C(vpn)+4 // zm1 | ym0 | zm0 | xm0 | local[1] | + // local[2] + fld %st(4) // local[1] | zm1 | ym0 | zm0 | xm0 | + // local[1] | local[2] + fmuls C(vright)+4 // xm1 | zm1 | ym0 | zm0 | xm0 | + // local[1] | local[2] + fxch %st(5) // local[1] | zm1 | ym0 | zm0 | xm0 | + // xm1 | local[2] + fmuls C(vup)+4 // ym1 | zm1 | ym0 | zm0 | xm0 | + // xm1 | local[2] + fxch %st(1) // zm1 | ym1 | ym0 | zm0 | xm0 | + // xm1 | local[2] + faddp %st(0),%st(3) // ym1 | ym0 | zm2 | xm0 | xm1 | local[2] + fxch %st(3) // xm0 | ym0 | zm2 | ym1 | xm1 | local[2] + faddp %st(0),%st(4) // ym0 | zm2 | ym1 | xm2 | local[2] + faddp %st(0),%st(2) // zm2 | ym2 | xm2 | local[2] + fld %st(3) // local[2] | zm2 | ym2 | xm2 | local[2] + fmuls C(vpn)+8 // zm3 | zm2 | ym2 | xm2 | local[2] + fld %st(4) // local[2] | zm3 | zm2 | ym2 | xm2 | local[2] + fmuls C(vright)+8 // xm3 | zm3 | zm2 | ym2 | xm2 | local[2] + fxch %st(5) // local[2] | zm3 | zm2 | ym2 | xm2 | xm3 + fmuls C(vup)+8 // ym3 | zm3 | zm2 | ym2 | xm2 | xm3 + fxch %st(1) // zm3 | ym3 | zm2 | ym2 | xm2 | xm3 + faddp %st(0),%st(2) // ym3 | zm4 | ym2 | xm2 | xm3 + fxch %st(4) // xm3 | zm4 | ym2 | xm2 | ym3 + faddp %st(0),%st(3) // zm4 | ym2 | xm4 | ym3 + fxch %st(1) // ym2 | zm4 | xm4 | ym3 + faddp %st(0),%st(3) // zm4 | xm4 | ym4 + + fcoms Lfp_near_clip + fnstsw %ax + testb $1,%ah + jz LNoClip + fstp %st(0) + flds Lfp_near_clip + +LNoClip: + + fdivrs float_1 // lzi0 | x | y + fxch %st(1) // x | lzi0 | y + +// // FIXME: build x/yscale into transform? +// scale = xscale * lzi0; +// u0 = (xcenter + scale*transformed[0]); + flds C(xscale) // xscale | x | lzi0 | y + fmul %st(2),%st(0) // scale | x | lzi0 | y + fmulp %st(0),%st(1) // scale*x | lzi0 | y + fadds C(xcenter) // u0 | lzi0 | y + +// if (u0 < r_refdef.fvrectx_adj) +// u0 = r_refdef.fvrectx_adj; +// if (u0 > r_refdef.fvrectright_adj) +// u0 = r_refdef.fvrectright_adj; +// FIXME: use integer compares of floats? + fcoms C(r_refdef)+rd_fvrectx_adj + fnstsw %ax + testb $1,%ah + jz LClampP0 + fstp %st(0) + flds C(r_refdef)+rd_fvrectx_adj +LClampP0: + fcoms C(r_refdef)+rd_fvrectright_adj + fnstsw %ax + testb $0x45,%ah + jnz LClampP1 + fstp %st(0) + flds C(r_refdef)+rd_fvrectright_adj +LClampP1: + + fld %st(1) // lzi0 | u0 | lzi0 | y + +// scale = yscale * lzi0; +// v0 = (ycenter - scale*transformed[1]); + fmuls C(yscale) // scale | u0 | lzi0 | y + fmulp %st(0),%st(3) // u0 | lzi0 | scale*y + fxch %st(2) // scale*y | lzi0 | u0 + fsubrs C(ycenter) // v0 | lzi0 | u0 + +// if (v0 < r_refdef.fvrecty_adj) +// v0 = r_refdef.fvrecty_adj; +// if (v0 > r_refdef.fvrectbottom_adj) +// v0 = r_refdef.fvrectbottom_adj; +// FIXME: use integer compares of floats? + fcoms C(r_refdef)+rd_fvrecty_adj + fnstsw %ax + testb $1,%ah + jz LClampP2 + fstp %st(0) + flds C(r_refdef)+rd_fvrecty_adj +LClampP2: + fcoms C(r_refdef)+rd_fvrectbottom_adj + fnstsw %ax + testb $0x45,%ah + jnz LClampP3 + fstp %st(0) + flds C(r_refdef)+rd_fvrectbottom_adj +LClampP3: + ret + +#endif // id386 + |
