Initial commit

1 files changed, 180 insertions, 0 deletions

diff --git a/projects/U200/U200.ip_user_files/sim_scripts/xdma/xcelium/xdma.sh b/projects/U200/U200.ip_user_files/sim_scripts/xdma/xcelium/xdma.sh
new file mode 100755
index 0000000..e70b217
--- /dev/null
+++ b/projects/U200/U200.ip_user_files/sim_scripts/xdma/xcelium/xdma.sh
@@ -0,0 +1,180 @@
+#!/bin/bash -f
+#*********************************************************************************************************
+# Vivado (TM) v2020.2 (64-bit)
+#
+# Filename    : xdma.sh
+# Simulator   : Cadence Xcelium Parallel Simulator
+# Description : Simulation script for compiling, elaborating and verifying the project source files.
+#               The script will automatically create the design libraries sub-directories in the run
+#               directory, add the library logical mappings in the simulator setup file, create default
+#               'do/prj' file, execute compilation, elaboration and simulation steps.
+#
+# Generated by Vivado on Tue Mar 08 14:25:07 CET 2022
+# SW Build 3064766 on Wed Nov 18 09:12:47 MST 2020
+#
+# Copyright 1986-2020 Xilinx, Inc. All Rights Reserved. 
+#
+# usage: xdma.sh [-help]
+# usage: xdma.sh [-lib_map_path]
+# usage: xdma.sh [-noclean_files]
+# usage: xdma.sh [-reset_run]
+#
+# Prerequisite:- To compile and run simulation, you must compile the Xilinx simulation libraries using the
+# 'compile_simlib' TCL command. For more information about this command, run 'compile_simlib -help' in the
+# Vivado Tcl Shell. Once the libraries have been compiled successfully, specify the -lib_map_path switch
+# that points to these libraries and rerun export_simulation. For more information about this switch please
+# type 'export_simulation -help' in the Tcl shell.
+#
+# You can also point to the simulation libraries by either replacing the <SPECIFY_COMPILED_LIB_PATH> in this
+# script with the compiled library directory path or specify this path with the '-lib_map_path' switch when
+# executing this script. Please type 'xdma.sh -help' for more information.
+#
+# Additional references - 'Xilinx Vivado Design Suite User Guide:Logic simulation (UG900)'
+#
+#*********************************************************************************************************
+
+# Directory path for design sources and include directories (if any) wrt this path
+ref_dir="."
+
+# Override directory with 'export_sim_ref_dir' env path value if set in the shell
+if [[ (! -z "$export_sim_ref_dir") && ($export_sim_ref_dir != "") ]]; then
+  ref_dir="$export_sim_ref_dir"
+fi
+
+# Set the compiled library directory
+ref_lib_dir="."
+
+# Command line options
+xrun_opts="-64bit -v93 -relax -access +rwc -namemap_mixgen"
+
+# Design libraries
+design_libs=(xilinx_vip xpm gtwizard_ultrascale_v1_7_9 xil_defaultlib blk_mem_gen_v8_4_4 xdma_v4_1_8)
+
+# Simulation root library directory
+sim_lib_dir="xcelium_lib"
+
+# Script info
+echo -e "xdma.sh - Script generated by export_simulation (Vivado v2020.2 (64-bit)-id)\n"
+
+# Main steps
+run()
+{
+  check_args $# $1
+  setup $1 $2
+  execute
+}
+
+# RUN_STEP: <execute>
+execute()
+{
+  xrun $xrun_opts \
+       -reflib "$ref_lib_dir/unisim:unisim" \
+       -reflib "$ref_lib_dir/unisims_ver:unisims_ver" \
+       -reflib "$ref_lib_dir/secureip:secureip" \
+       -reflib "$ref_lib_dir/unimacro:unimacro" \
+       -reflib "$ref_lib_dir/unimacro_ver:unimacro_ver" \
+       -top xil_defaultlib.xdma \
+       -f run.f \
+       -top glbl \
+       glbl.v \
+       +incdir+"$ref_dir/../../../../U200.srcs/sources_1/ip/xdma/ip_0/source" \
+       +incdir+"$ref_dir/../../../ipstatic/hdl/verilog" \
+       +incdir+"../../../../U200.srcs/sources_1/ip/xdma/ip_0/source" \
+       +incdir+"../../../ipstatic/hdl/verilog" \
+       +incdir+"/tools/Xilinx/Vivado/2020.2/data/xilinx_vip/include"
+}
+
+# STEP: setup
+setup()
+{
+  case $1 in
+    "-lib_map_path" )
+      if [[ ($2 == "") ]]; then
+        echo -e "ERROR: Simulation library directory path not specified (type \"./xdma.sh -help\" for more information)\n"
+        exit 1
+      else
+        ref_lib_dir=$2
+      fi
+    ;;
+    "-reset_run" )
+      reset_run
+      echo -e "INFO: Simulation run files deleted.\n"
+      exit 0
+    ;;
+    "-noclean_files" )
+      # do not remove previous data
+    ;;
+    * )
+  esac
+
+  create_lib_dir
+
+  # Add any setup/initialization commands here:-
+
+  # <user specific commands>
+
+}
+
+# Create design library directory paths
+create_lib_dir()
+{
+  if [[ -e $sim_lib_dir ]]; then
+    rm -rf $sim_lib_dir
+  fi
+
+  for (( i=0; i<${#design_libs[*]}; i++ )); do
+    lib="${design_libs[i]}"
+    lib_dir="$sim_lib_dir/$lib"
+    if [[ ! -e $lib_dir ]]; then
+      mkdir -p $lib_dir
+    fi
+  done
+}
+
+# Delete generated data from the previous run
+reset_run()
+{
+  files_to_remove=(xmsim.key xrun.key xrun.log waves.shm xrun.history .simvision xcelium.d xcelium)
+  for (( i=0; i<${#files_to_remove[*]}; i++ )); do
+    file="${files_to_remove[i]}"
+    if [[ -e $file ]]; then
+      rm -rf $file
+    fi
+  done
+
+  create_lib_dir
+}
+
+# Check command line arguments
+check_args()
+{
+  if [[ ($1 == 1 ) && ($2 != "-lib_map_path" && $2 != "-noclean_files" && $2 != "-reset_run" && $2 != "-help" && $2 != "-h") ]]; then
+    echo -e "ERROR: Unknown option specified '$2' (type \"./xdma.sh -help\" for more information)\n"
+    exit 1
+  fi
+
+  if [[ ($2 == "-help" || $2 == "-h") ]]; then
+    usage
+  fi
+}
+
+# Script usage
+usage()
+{
+  msg="Usage: xdma.sh [-help]\n\
+Usage: xdma.sh [-lib_map_path]\n\
+Usage: xdma.sh [-reset_run]\n\
+Usage: xdma.sh [-noclean_files]\n\n\
+[-help] -- Print help information for this script\n\n\
+[-lib_map_path <path>] -- Compiled simulation library directory path. The simulation library is compiled\n\
+using the compile_simlib tcl command. Please see 'compile_simlib -help' for more information.\n\n\
+[-reset_run] -- Recreate simulator setup files and library mappings for a clean run. The generated files\n\
+from the previous run will be removed. If you don't want to remove the simulator generated files, use the\n\
+-noclean_files switch.\n\n\
+[-noclean_files] -- Reset previous run, but do not remove simulator generated files from the previous run.\n\n"
+  echo -e $msg
+  exit 1
+}
+
+# Launch script
+run $1 $2