diff options
Diffstat (limited to 'projects/U200/U200.ip_user_files/ip/phy_ddr4/phy_ddr4.veo')
| -rwxr-xr-x | projects/U200/U200.ip_user_files/ip/phy_ddr4/phy_ddr4.veo | 116 |
1 files changed, 116 insertions, 0 deletions
diff --git a/projects/U200/U200.ip_user_files/ip/phy_ddr4/phy_ddr4.veo b/projects/U200/U200.ip_user_files/ip/phy_ddr4/phy_ddr4.veo new file mode 100755 index 0000000..10d8dbe --- /dev/null +++ b/projects/U200/U200.ip_user_files/ip/phy_ddr4/phy_ddr4.veo @@ -0,0 +1,116 @@ +// (c) Copyright 1995-2022 Xilinx, Inc. All rights reserved. +// +// This file contains confidential and proprietary information +// of Xilinx, Inc. and is protected under U.S. and +// international copyright and other intellectual property +// laws. +// +// DISCLAIMER +// This disclaimer is not a license and does not grant any +// rights to the materials distributed herewith. Except as +// otherwise provided in a valid license issued to you by +// Xilinx, and to the maximum extent permitted by applicable +// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND +// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES +// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING +// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- +// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and +// (2) Xilinx shall not be liable (whether in contract or tort, +// including negligence, or under any other theory of +// liability) for any loss or damage of any kind or nature +// related to, arising under or in connection with these +// materials, including for any direct, or any indirect, +// special, incidental, or consequential loss or damage +// (including loss of data, profits, goodwill, or any type of +// loss or damage suffered as a result of any action brought +// by a third party) even if such damage or loss was +// reasonably foreseeable or Xilinx had been advised of the +// possibility of the same. +// +// CRITICAL APPLICATIONS +// Xilinx products are not designed or intended to be fail- +// safe, or for use in any application requiring fail-safe +// performance, such as life-support or safety devices or +// systems, Class III medical devices, nuclear facilities, +// applications related to the deployment of airbags, or any +// other applications that could lead to death, personal +// injury, or severe property or environmental damage +// (individually and collectively, "Critical +// Applications"). Customer assumes the sole risk and +// liability of any use of Xilinx products in Critical +// Applications, subject only to applicable laws and +// regulations governing limitations on product liability. +// +// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS +// PART OF THIS FILE AT ALL TIMES. +// +// DO NOT MODIFY THIS FILE. + +// IP VLNV: xilinx.com:ip:ddr4:2.2 +// IP Revision: 10 + +// The following must be inserted into your Verilog file for this +// core to be instantiated. Change the instance name and port connections +// (in parentheses) to your own signal names. + +//----------- Begin Cut here for INSTANTIATION Template ---// INST_TAG +phy_ddr4 your_instance_name ( + .c0_init_calib_complete(c0_init_calib_complete), // output wire c0_init_calib_complete + .dbg_clk(dbg_clk), // output wire dbg_clk + .c0_sys_clk_p(c0_sys_clk_p), // input wire c0_sys_clk_p + .c0_sys_clk_n(c0_sys_clk_n), // input wire c0_sys_clk_n + .dbg_bus(dbg_bus), // output wire [511 : 0] dbg_bus + .c0_ddr4_parity(c0_ddr4_parity), // output wire c0_ddr4_parity + .c0_ddr4_ui_clk(c0_ddr4_ui_clk), // output wire c0_ddr4_ui_clk + .c0_ddr4_ui_clk_sync_rst(c0_ddr4_ui_clk_sync_rst), // output wire c0_ddr4_ui_clk_sync_rst + .addn_ui_clkout1(addn_ui_clkout1), // output wire addn_ui_clkout1 + .sys_rst(sys_rst), // input wire sys_rst + .rdDataEn(rdDataEn), // output wire [0 : 0] rdDataEn + .rdDataEnd(rdDataEnd), // output wire [0 : 0] rdDataEnd + .per_rd_done(per_rd_done), // output wire [0 : 0] per_rd_done + .rmw_rd_done(rmw_rd_done), // output wire [0 : 0] rmw_rd_done + .wrDataEn(wrDataEn), // output wire [0 : 0] wrDataEn + .mc_ACT_n(mc_ACT_n), // input wire [7 : 0] mc_ACT_n + .mcCasSlot(mcCasSlot), // input wire [1 : 0] mcCasSlot + .mcCasSlot2(mcCasSlot2), // input wire [0 : 0] mcCasSlot2 + .mcRdCAS(mcRdCAS), // input wire [0 : 0] mcRdCAS + .mcWrCAS(mcWrCAS), // input wire [0 : 0] mcWrCAS + .winInjTxn(winInjTxn), // input wire [0 : 0] winInjTxn + .winRmw(winRmw), // input wire [0 : 0] winRmw + .gt_data_ready(gt_data_ready), // input wire gt_data_ready + .winRank(winRank), // input wire [1 : 0] winRank + .tCWL(tCWL), // output wire [5 : 0] tCWL + .wrData(wrData), // input wire [575 : 0] wrData + .rdData(rdData), // output wire [575 : 0] rdData + .mc_ADR(mc_ADR), // input wire [143 : 0] mc_ADR + .mc_BA(mc_BA), // input wire [15 : 0] mc_BA + .mc_CKE(mc_CKE), // input wire [7 : 0] mc_CKE + .mc_CS_n(mc_CS_n), // input wire [7 : 0] mc_CS_n + .mc_ODT(mc_ODT), // input wire [7 : 0] mc_ODT + .dBufAdr(dBufAdr), // input wire [4 : 0] dBufAdr + .rdDataAddr(rdDataAddr), // output wire [4 : 0] rdDataAddr + .wrDataAddr(wrDataAddr), // output wire [4 : 0] wrDataAddr + .winBuf(winBuf), // input wire [4 : 0] winBuf + .ddr4_act_n(ddr4_act_n), // output wire ddr4_act_n + .ddr4_adr(ddr4_adr), // output wire [17 : 0] ddr4_adr + .ddr4_ba(ddr4_ba), // output wire [1 : 0] ddr4_ba + .ddr4_bg(ddr4_bg), // output wire [1 : 0] ddr4_bg + .ddr4_par(ddr4_par), // output wire ddr4_par + .ddr4_cke(ddr4_cke), // output wire [0 : 0] ddr4_cke + .ddr4_odt(ddr4_odt), // output wire [0 : 0] ddr4_odt + .ddr4_cs_n(ddr4_cs_n), // output wire [0 : 0] ddr4_cs_n + .ddr4_ck_t(ddr4_ck_t), // output wire ddr4_ck_t + .ddr4_ck_c(ddr4_ck_c), // output wire ddr4_ck_c + .ddr4_reset_n(ddr4_reset_n), // output wire ddr4_reset_n + .ddr4_parity(ddr4_parity), // output wire ddr4_parity + .ddr4_dq(ddr4_dq), // inout wire [71 : 0] ddr4_dq + .ddr4_dqs_c(ddr4_dqs_c), // inout wire [17 : 0] ddr4_dqs_c + .ddr4_dqs_t(ddr4_dqs_t), // inout wire [17 : 0] ddr4_dqs_t + .mc_BG(mc_BG) // input wire [15 : 0] mc_BG +); +// INST_TAG_END ------ End INSTANTIATION Template --------- + +// You must compile the wrapper file phy_ddr4.v when simulating +// the core, phy_ddr4. When compiling the wrapper file, be sure to +// reference the Verilog simulation library. + |