1 files changed, 177 insertions, 0 deletions
diff --git a/projects/U200/U200.ip_user_files/ip/phy_ddr4/phy_ddr4.vho b/projects/U200/U200.ip_user_files/ip/phy_ddr4/phy_ddr4.vho
new file mode 100755
index 0000000..24c61fa
--- /dev/null
+++ b/projects/U200/U200.ip_user_files/ip/phy_ddr4/phy_ddr4.vho
@@ -0,0 +1,177 @@
+-- (c) Copyright 1995-2022 Xilinx, Inc. All rights reserved.
+-- 
+-- This file contains confidential and proprietary information
+-- of Xilinx, Inc. and is protected under U.S. and
+-- international copyright and other intellectual property
+-- laws.
+-- 
+-- DISCLAIMER
+-- This disclaimer is not a license and does not grant any
+-- rights to the materials distributed herewith. Except as
+-- otherwise provided in a valid license issued to you by
+-- Xilinx, and to the maximum extent permitted by applicable
+-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+-- (2) Xilinx shall not be liable (whether in contract or tort,
+-- including negligence, or under any other theory of
+-- liability) for any loss or damage of any kind or nature
+-- related to, arising under or in connection with these
+-- materials, including for any direct, or any indirect,
+-- special, incidental, or consequential loss or damage
+-- (including loss of data, profits, goodwill, or any type of
+-- loss or damage suffered as a result of any action brought
+-- by a third party) even if such damage or loss was
+-- reasonably foreseeable or Xilinx had been advised of the
+-- possibility of the same.
+-- 
+-- CRITICAL APPLICATIONS
+-- Xilinx products are not designed or intended to be fail-
+-- safe, or for use in any application requiring fail-safe
+-- performance, such as life-support or safety devices or
+-- systems, Class III medical devices, nuclear facilities,
+-- applications related to the deployment of airbags, or any
+-- other applications that could lead to death, personal
+-- injury, or severe property or environmental damage
+-- (individually and collectively, "Critical
+-- Applications"). Customer assumes the sole risk and
+-- liability of any use of Xilinx products in Critical
+-- Applications, subject only to applicable laws and
+-- regulations governing limitations on product liability.
+-- 
+-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+-- PART OF THIS FILE AT ALL TIMES.
+-- 
+-- DO NOT MODIFY THIS FILE.
+
+-- IP VLNV: xilinx.com:ip:ddr4:2.2
+-- IP Revision: 10
+
+-- The following code must appear in the VHDL architecture header.
+
+------------- Begin Cut here for COMPONENT Declaration ------ COMP_TAG
+COMPONENT phy_ddr4
+  PORT (
+    c0_init_calib_complete : OUT STD_LOGIC;
+    dbg_clk : OUT STD_LOGIC;
+    c0_sys_clk_p : IN STD_LOGIC;
+    c0_sys_clk_n : IN STD_LOGIC;
+    dbg_bus : OUT STD_LOGIC_VECTOR(511 DOWNTO 0);
+    c0_ddr4_parity : OUT STD_LOGIC;
+    c0_ddr4_ui_clk : OUT STD_LOGIC;
+    c0_ddr4_ui_clk_sync_rst : OUT STD_LOGIC;
+    addn_ui_clkout1 : OUT STD_LOGIC;
+    sys_rst : IN STD_LOGIC;
+    rdDataEn : OUT STD_LOGIC_VECTOR(0 DOWNTO 0);
+    rdDataEnd : OUT STD_LOGIC_VECTOR(0 DOWNTO 0);
+    per_rd_done : OUT STD_LOGIC_VECTOR(0 DOWNTO 0);
+    rmw_rd_done : OUT STD_LOGIC_VECTOR(0 DOWNTO 0);
+    wrDataEn : OUT STD_LOGIC_VECTOR(0 DOWNTO 0);
+    mc_ACT_n : IN STD_LOGIC_VECTOR(7 DOWNTO 0);
+    mcCasSlot : IN STD_LOGIC_VECTOR(1 DOWNTO 0);
+    mcCasSlot2 : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    mcRdCAS : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    mcWrCAS : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    winInjTxn : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    winRmw : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    gt_data_ready : IN STD_LOGIC;
+    winRank : IN STD_LOGIC_VECTOR(1 DOWNTO 0);
+    tCWL : OUT STD_LOGIC_VECTOR(5 DOWNTO 0);
+    wrData : IN STD_LOGIC_VECTOR(575 DOWNTO 0);
+    rdData : OUT STD_LOGIC_VECTOR(575 DOWNTO 0);
+    mc_ADR : IN STD_LOGIC_VECTOR(143 DOWNTO 0);
+    mc_BA : IN STD_LOGIC_VECTOR(15 DOWNTO 0);
+    mc_CKE : IN STD_LOGIC_VECTOR(7 DOWNTO 0);
+    mc_CS_n : IN STD_LOGIC_VECTOR(7 DOWNTO 0);
+    mc_ODT : IN STD_LOGIC_VECTOR(7 DOWNTO 0);
+    dBufAdr : IN STD_LOGIC_VECTOR(4 DOWNTO 0);
+    rdDataAddr : OUT STD_LOGIC_VECTOR(4 DOWNTO 0);
+    wrDataAddr : OUT STD_LOGIC_VECTOR(4 DOWNTO 0);
+    winBuf : IN STD_LOGIC_VECTOR(4 DOWNTO 0);
+    ddr4_act_n : OUT STD_LOGIC;
+    ddr4_adr : OUT STD_LOGIC_VECTOR(17 DOWNTO 0);
+    ddr4_ba : OUT STD_LOGIC_VECTOR(1 DOWNTO 0);
+    ddr4_bg : OUT STD_LOGIC_VECTOR(1 DOWNTO 0);
+    ddr4_par : OUT STD_LOGIC;
+    ddr4_cke : OUT STD_LOGIC_VECTOR(0 DOWNTO 0);
+    ddr4_odt : OUT STD_LOGIC_VECTOR(0 DOWNTO 0);
+    ddr4_cs_n : OUT STD_LOGIC_VECTOR(0 DOWNTO 0);
+    ddr4_ck_t : OUT STD_LOGIC;
+    ddr4_ck_c : OUT STD_LOGIC;
+    ddr4_reset_n : OUT STD_LOGIC;
+    ddr4_parity : OUT STD_LOGIC;
+    ddr4_dq : INOUT STD_LOGIC_VECTOR(71 DOWNTO 0);
+    ddr4_dqs_c : INOUT STD_LOGIC_VECTOR(17 DOWNTO 0);
+    ddr4_dqs_t : INOUT STD_LOGIC_VECTOR(17 DOWNTO 0);
+    mc_BG : IN STD_LOGIC_VECTOR(15 DOWNTO 0)
+  );
+END COMPONENT;
+-- COMP_TAG_END ------ End COMPONENT Declaration ------------
+
+-- The following code must appear in the VHDL architecture
+-- body. Substitute your own instance name and net names.
+
+------------- Begin Cut here for INSTANTIATION Template ----- INST_TAG
+your_instance_name : phy_ddr4
+  PORT MAP (
+    c0_init_calib_complete => c0_init_calib_complete,
+    dbg_clk => dbg_clk,
+    c0_sys_clk_p => c0_sys_clk_p,
+    c0_sys_clk_n => c0_sys_clk_n,
+    dbg_bus => dbg_bus,
+    c0_ddr4_parity => c0_ddr4_parity,
+    c0_ddr4_ui_clk => c0_ddr4_ui_clk,
+    c0_ddr4_ui_clk_sync_rst => c0_ddr4_ui_clk_sync_rst,
+    addn_ui_clkout1 => addn_ui_clkout1,
+    sys_rst => sys_rst,
+    rdDataEn => rdDataEn,
+    rdDataEnd => rdDataEnd,
+    per_rd_done => per_rd_done,
+    rmw_rd_done => rmw_rd_done,
+    wrDataEn => wrDataEn,
+    mc_ACT_n => mc_ACT_n,
+    mcCasSlot => mcCasSlot,
+    mcCasSlot2 => mcCasSlot2,
+    mcRdCAS => mcRdCAS,
+    mcWrCAS => mcWrCAS,
+    winInjTxn => winInjTxn,
+    winRmw => winRmw,
+    gt_data_ready => gt_data_ready,
+    winRank => winRank,
+    tCWL => tCWL,
+    wrData => wrData,
+    rdData => rdData,
+    mc_ADR => mc_ADR,
+    mc_BA => mc_BA,
+    mc_CKE => mc_CKE,
+    mc_CS_n => mc_CS_n,
+    mc_ODT => mc_ODT,
+    dBufAdr => dBufAdr,
+    rdDataAddr => rdDataAddr,
+    wrDataAddr => wrDataAddr,
+    winBuf => winBuf,
+    ddr4_act_n => ddr4_act_n,
+    ddr4_adr => ddr4_adr,
+    ddr4_ba => ddr4_ba,
+    ddr4_bg => ddr4_bg,
+    ddr4_par => ddr4_par,
+    ddr4_cke => ddr4_cke,
+    ddr4_odt => ddr4_odt,
+    ddr4_cs_n => ddr4_cs_n,
+    ddr4_ck_t => ddr4_ck_t,
+    ddr4_ck_c => ddr4_ck_c,
+    ddr4_reset_n => ddr4_reset_n,
+    ddr4_parity => ddr4_parity,
+    ddr4_dq => ddr4_dq,
+    ddr4_dqs_c => ddr4_dqs_c,
+    ddr4_dqs_t => ddr4_dqs_t,
+    mc_BG => mc_BG
+  );
+-- INST_TAG_END ------ End INSTANTIATION Template ---------
+
+-- You must compile the wrapper file phy_ddr4.vhd when simulating
+-- the core, phy_ddr4. When compiling the wrapper file, be sure to
+-- reference the VHDL simulation library.
+