1 files changed, 174 insertions, 0 deletions
diff --git a/projects/XUPVVH/XUPVVH.ip_user_files/sim_scripts/xdma/questa/xdma.sh b/projects/XUPVVH/XUPVVH.ip_user_files/sim_scripts/xdma/questa/xdma.sh
new file mode 100755
index 0000000..160ab92
--- /dev/null
+++ b/projects/XUPVVH/XUPVVH.ip_user_files/sim_scripts/xdma/questa/xdma.sh
@@ -0,0 +1,174 @@
+#!/bin/bash -f
+#*********************************************************************************************************
+# Vivado (TM) v2019.2 (64-bit)
+#
+# Filename    : xdma.sh
+# Simulator   : Mentor Graphics Questa Advanced Simulator
+# Description : Simulation script for compiling, elaborating and verifying the project source files.
+#               The script will automatically create the design libraries sub-directories in the run
+#               directory, add the library logical mappings in the simulator setup file, create default
+#               'do/prj' file, execute compilation, elaboration and simulation steps.
+#
+# Generated by Vivado on Sun Oct 18 14:23:48 +03 2020
+# SW Build 2708876 on Wed Nov  6 21:39:14 MST 2019
+#
+# Copyright 1986-2019 Xilinx, Inc. All Rights Reserved. 
+#
+# usage: xdma.sh [-help]
+# usage: xdma.sh [-lib_map_path]
+# usage: xdma.sh [-noclean_files]
+# usage: xdma.sh [-reset_run]
+#
+# Prerequisite:- To compile and run simulation, you must compile the Xilinx simulation libraries using the
+# 'compile_simlib' TCL command. For more information about this command, run 'compile_simlib -help' in the
+# Vivado Tcl Shell. Once the libraries have been compiled successfully, specify the -lib_map_path switch
+# that points to these libraries and rerun export_simulation. For more information about this switch please
+# type 'export_simulation -help' in the Tcl shell.
+#
+# You can also point to the simulation libraries by either replacing the <SPECIFY_COMPILED_LIB_PATH> in this
+# script with the compiled library directory path or specify this path with the '-lib_map_path' switch when
+# executing this script. Please type 'xdma.sh -help' for more information.
+#
+# Additional references - 'Xilinx Vivado Design Suite User Guide:Logic simulation (UG900)'
+#
+#*********************************************************************************************************
+
+
+# Script info
+echo -e "xdma.sh - Script generated by export_simulation (Vivado v2019.2 (64-bit)-id)\n"
+
+# Main steps
+run()
+{
+  check_args $# $1
+  setup $1 $2
+  compile
+  elaborate
+  simulate
+}
+
+# RUN_STEP: <compile>
+compile()
+{
+  # Compile design files
+  source compile.do 2>&1 | tee -a compile.log
+
+}
+
+# RUN_STEP: <elaborate>
+elaborate()
+{
+  source elaborate.do 2>&1 | tee -a elaborate.log
+}
+
+# RUN_STEP: <simulate>
+simulate()
+{
+  vsim -64 -c -do "do {simulate.do}" -l simulate.log
+}
+
+# STEP: setup
+setup()
+{
+  case $1 in
+    "-lib_map_path" )
+      if [[ ($2 == "") ]]; then
+        echo -e "ERROR: Simulation library directory path not specified (type \"./xdma.sh -help\" for more information)\n"
+        exit 1
+      fi
+     copy_setup_file $2
+    ;;
+    "-reset_run" )
+      reset_run
+      echo -e "INFO: Simulation run files deleted.\n"
+      exit 0
+    ;;
+    "-noclean_files" )
+      # do not remove previous data
+    ;;
+    * )
+     copy_setup_file $2
+  esac
+
+  create_lib_dir
+
+  # Add any setup/initialization commands here:-
+
+  # <user specific commands>
+
+}
+
+# Copy modelsim.ini file
+copy_setup_file()
+{
+  file="modelsim.ini"
+  if [[ ($1 != "") ]]; then
+    lib_map_path="$1"
+  else
+    lib_map_path="/home/ataberk/SoftMC_DDR4/projects/XUPVVH/XUPVVH.cache/compile_simlib/questa"
+  fi
+  if [[ ($lib_map_path != "") ]]; then
+    src_file="$lib_map_path/$file"
+    cp $src_file .
+  fi
+}
+
+# Create design library directory
+create_lib_dir()
+{
+  lib_dir="questa_lib"
+  if [[ -e $lib_dir ]]; then
+    rm -rf $lib_dir
+  fi
+
+  mkdir $lib_dir
+
+}
+
+# Delete generated data from the previous run
+reset_run()
+{
+  files_to_remove=(compile.log elaborate.log simulate.log vsim.wlf questa_lib)
+  for (( i=0; i<${#files_to_remove[*]}; i++ )); do
+    file="${files_to_remove[i]}"
+    if [[ -e $file ]]; then
+      rm -rf $file
+    fi
+  done
+
+  create_lib_dir
+}
+
+# Check command line arguments
+check_args()
+{
+  if [[ ($1 == 1 ) && ($2 != "-lib_map_path" && $2 != "-noclean_files" && $2 != "-reset_run" && $2 != "-help" && $2 != "-h") ]]; then
+    echo -e "ERROR: Unknown option specified '$2' (type \"./xdma.sh -help\" for more information)\n"
+    exit 1
+  fi
+
+  if [[ ($2 == "-help" || $2 == "-h") ]]; then
+    usage
+  fi
+}
+
+# Script usage
+usage()
+{
+  msg="Usage: xdma.sh [-help]\n\
+Usage: xdma.sh [-lib_map_path]\n\
+Usage: xdma.sh [-reset_run]\n\
+Usage: xdma.sh [-noclean_files]\n\n\
+[-help] -- Print help information for this script\n\n\
+[-lib_map_path <path>] -- Compiled simulation library directory path. The simulation library is compiled\n\
+using the compile_simlib tcl command. Please see 'compile_simlib -help' for more information.\n\n\
+[-reset_run] -- Recreate simulator setup files and library mappings for a clean run. The generated files\n\
+from the previous run will be removed. If you don't want to remove the simulator generated files, use the\n\
+-noclean_files switch.\n\n\
+[-noclean_files] -- Reset previous run, but do not remove simulator generated files from the previous run.\n\n"
+  echo -e $msg
+  exit 1
+}
+
+# Launch script
+run $1 $2