Removed accidental upload of copyrighted map files

1 files changed, 278 insertions, 278 deletions

diff --git a/WinQuake/kit/3DFX.TXT b/WinQuake/kit/3DFX.TXT
index 283fdd3..6c0aa1d 100644
--- a/WinQuake/kit/3DFX.TXT
+++ b/WinQuake/kit/3DFX.TXT
@@ -1,279 +1,279 @@
-GLQuake Drivers for Voodoo Graphics Based 3D Accelerators
-Preliminary Release 2
-
-Copyright ( 1997 3Dfx Interactive, Inc. )
-All Rights Reserved
-
-3Dfx Interactive, Inc.
-www: www.3dfx.com
-news: news.3dfx.com  
-
------------------------------------------------------------------------
-NOTE: GLQuake requires DirectX 2.0 or DirectX 3.0
-(Needed for DirectSound support)
-
-DirectX 2.0 or DirectX 3.0 can be installed from the media provided
-with your Voodoo Based 3D Accelerator.
------------------------------------------------------------------------
-
-
-
-Release Notes for GLQuake Preliminary Release 2 (Quake Version 1.07)
-
------------------------------------------------------------------------
-What's in the distribution?
------------------------------------------------------------------------
-This distribution contains GLQuake Drivers for Voodoo Graphics Based 3D
-Accelerators.  These drivers were tested on the following boards: 
-
-- Diamond Monster 3D
-- Orchid Righteous 3D
-- 3Dfx Interactive reference boards
-
-NOTE:  The enclosed drivers are not meant to replace any Direct3D or 
-Glide drivers provided by your Voodoo Graphics card manufacturer. 
-Please obtain supported drivers from:
-
-- Diamond supported drivers can be obtained from www.diamondmm.com
-- Orchid supported drivers can be obtained from www.orchid.com
-
-
-Included Files
---------------
-
-OPENGL32.DLL - QuakeGL Interface to Voodoo Graphics
-FXMEMMAP.VXD - Voodoo Graphics VXD
-GLQUAKE.EXE  - ID Software provided GLQUAKE.EXE
-README.TXT   - ID Software provided README.TXT
-READ3DFX.TXT - This File
-
-All enclosed files MUST reside in your Quake directory and not in the
-Windows\SYSTEM directory.  
-
-OEMSR2 users: Do NOT replace OPENGL32.DLL located in your
-Windows\SYSTEM directory.
-
-
-
------------------------------------------------------------------------
-Installation 
------------------------------------------------------------------------
-
-Requirements
-------------
-
-- Voodoo Graphics Based 3D Accelerator
-- Windows 95
-- A PC with a Pentium 90 or higher CPU
-- 16MB of RAM
-- 2D Video card set at 16 bit or higher color
-
-Installation
-------------
-
-Adding GLQuake Driver Support
------------------------------
-1) Install the FULL Version (Not the Shareware version!) of Quake.
-
-2) Copy the GLQUAKE.EXE and other associated files from the GLQuake
-   ZIP file to your Quake Directory.  (Use Windows Explorer)
-
-3) Copy the enclosed OPENGL32.DLL file to your Quake Directory.
-   (Use Windows Explorer)   NOTE: DO NOT COPY OPENGL32.DLL to your
-   Windows\SYSTEM directory
-
-4) Create a Desktop Shortcut for GLQuake:  Using the right mouse button
-   drag the GLQUAKE.EXE file from Windows Explorer to the Desktop.
-         When prompted choose "Create Shortcut"
-
-5) Create an autoexec.cfg file in the ID1\ directory of your quake
-   installation if you do not already have one.  Add the line
-
-   gl_playermip "2"
-
-   to the file.
-
-6) Start GLQuake by running the shortcut. 
-
-
-Troubleshooting and Frequently Asked Questions
-----------------------------------------------
-
-1. Will GLQuake work with shareware Quake?
-
-No, the full registered version of Quake is required.  
-
-
-
-2. Do I need any other drivers to run GLQuake on Voodoo Graphics?
-
-Just make sure that the FXMEMMAP.VXD file is in your Windows\SYSTEM 
-directory and that DirectX 2.0, DirectX 3.0 or DirectX 3.0a are
-installed as GLQuake uses DirectSound. The latest version of DirectX
-can be obtained from:
-	http://www.microsoft.com/mediadev/download/isdk.htm
-
-
-
-3. I installed GLQuake and try to run the GLQUAKE.EXE file but I get a 
-"no RGB fullscreen modes available"  How do I get GLQuake to run?
-
-Make sure that your 2D video card is set to 16bit color (65K colors,
-not 16 colors). In addition, do not start GLQuake from a full screen
-MS-DOS prompt.
-
-
-
-4. GLQuake comes up for a little while then drops me back to the
-Windows 95 desktop, what's wrong?
-
-Your Virtual Memory settings on your system should be increased.  Open
-Control Panel, System - click on the Performance tab and then click on
-Virtual Memory.  Adjust the settings so that the minimum swap file size
-is 80MB.   You may also want to delete all the mesh files - do this by
-deleting the quake\ID1\glquake directory.
-
-
-
-5. Why does GLQuake try to connect to my Internet connection whenever
-it starts?
-
-GLQuake uses Windows networking. Auto-Dial is likely enabled in your
-Internet Control Panel or in Internet Explorer Options.  Single
-Player users: To disable Network use in GLQuake and prevent the
-network connection screen from coming up, add "-nolan" to the
-GLQUAKE.EXE command line, example:
-	GLQUAKE.EXE -nolan
-
-
-
-
-6. I have a three button mouse, but I can't use or set the middle 
-button in GLQuake, what's wrong?
-
-To use a three button mouse with GLQuake, your Windows mouse driver
-must support three buttons.  Use the Logitech PS/2, Serial or Bus
-driver instead of the Microsoft or Standard PS/2, Serial or Bus driver.
-Also, make certain that your Mouse control panel sets the middle button
-to "middle" and not "double click".
-
-
-
-7. Mouse input seems jumpy, how do I fix that?
-
-From the console (hit the ~ tilde key), enter m_filter 1 <enter>
-This option can be added to the AUTOEXEC.CFG file (in the \ID1
-directory).  You may also add this option to the GLQUAKE.EXE command
-line, example:
-	GLQUAKE.EXE +m_filter 1
-
-
-
-8. While playing GLQuake the sound stutters, how do I fix it?
-
-If your sound card does not support DirectSound, you may encounter
-stuttering sound during game play.  Try adding the following value to
-the CONFIG.CFG file (in the quake\ID1 directory):
-		 _snd_mixahead ".14"
-
-
-
-9. When I hit ALT-TAB or the Windows start button to switch to another
-application why do I return to a 640x480 display?
-
-GLQuake by default needs to keep the 2D display at 640x480 while it is
-running. To return the display to your normal setting you must exit
-GLQuake.  To prevent this, add the following to the GLQUAKE.EXE command
-line options "+_windowed_mouse 1" and "-window"   example:
-	GLQUAKE.EXE +_windowed_mouse 1 -window
-
-
-
-10. GLQuake multiplayer can't find other games or won't connect.
-
-GLQuake uses Windows 95 Networking.  Verify that the correct networking
-components are installed and that you can connect to the other machine
-using File and print sharing or TCP/IP ping.  If you are using IPX also
-make certain that the frame type is the same on all the systems.
-
-
-
-11. GLQuake multiplayer slows down alot, how do I fix it?
-
-Add gl_playermip 2 to the AUTOEXEC.CFG file (in the \ID1 directory)
-You may however add "+gl_playermip 2" to the GLQUAKE.EXE command line,
-example:
-	GLQUAKE.EXE +gl_playermip 2
-
-
-
-12. Does the Activision(r) Scourge of Armagon add-on (Mission Pack 1)
-work with GLQuake?
-
-Yes, start GLQUAKE.EXE with a "-hipnotic" switch.   Example:
-	GLQUAKE.EXE -hipnotic
-
-
-
-13. Do other 3rd party quake levels work with GLQuake?
-
-Not all 3rd party levels have been tested, some may not work properly
-or optimally.
-
-
-
-14. Will GLQuake use a Voodoo Graphics accelerator under Windows NT?
-
-The 3Dfx GLQuake drivers currently only work under Windows 95.  
-
-
-
-15. After installing GLQuake the OpenGL screen savers in Windows 95
-(OEMSR2) don't work. What's wrong?
-
-The OpenGL Windows 95 screen savers in OEMSR2 will fail if you copied
-the OPENGL32.DLL file that comes with GLQuake to your Windows\SYSTEM
-directory.  The 3Dfx OPENGL32.DLL file only works with Quake. It will
-not run with other OpenGL applications.  If you copied the 3Dfx 
-OPENGL32.DLL to your Windows\SYSTEM directory and need to restore the
-Microsoft provided OPENGL32.DLL, follow these steps:
-
-	OEMSR2 Users
-	------------
-	1) Insert your Windows 95 CD into your CD-ROM drive
-	2) Open a MS-DOS prompt, (Click Start, Programs, MS-DOS Prompt)
-	3) Switch to the Windows\SYSTEM directory, ie:
-		C: <enter>
-		CD\Windows\system <enter>
-	4) At the command prompt, enter:
-		EXTRACT /A E:\WIN95 opengl32.dll <enter>
-		(Substitute E:\ for your CD-ROM drive letter)
-	
-	Standard Windows 95 Users
-	-------------------------
-	1) Download and reinstall OpenGL for Windows 95 from the source
-	you previously used.
-		
-
-
-16. How do I get support for GLQuake
-
-GLQuake is currently unsupported.  You may however find answers to 
-questions on various Quake dedicated websites.  3Dfx provides a GLQuake
-newsgroup on news.3dfx.com (Newsgroup name is 3dfx.games.glquake ) to
-discuss GLQuake with other users.  3Dfx also provides a regularly
-updated GLQuake FAQ at: http://www.3dfx.com/game_dev/quake_faq.html
-
-
-
-16. How do I send a bug report?
-
-If your problem is not resolved in this document or our updated FAQ
-(please see #15) and your bug is related to visual quality, performance
-or stability send an email to quake_bugs@3dfx.com   - Describe your
-system configuration  (CPU Type, CPU Speed, 2D Video Card type, Amount
-of Memory, Virtual Memory Size..etc.) and how to recreate the bug.  
-
-
-Voodoo Graphics is a trademark of 3Dfx Interactive, Inc.  All other
+GLQuake Drivers for Voodoo Graphics Based 3D Accelerators

+Preliminary Release 2

+

+Copyright ( 1997 3Dfx Interactive, Inc. )

+All Rights Reserved

+

+3Dfx Interactive, Inc.

+www: www.3dfx.com

+news: news.3dfx.com  

+

+-----------------------------------------------------------------------

+NOTE: GLQuake requires DirectX 2.0 or DirectX 3.0

+(Needed for DirectSound support)

+

+DirectX 2.0 or DirectX 3.0 can be installed from the media provided

+with your Voodoo Based 3D Accelerator.

+-----------------------------------------------------------------------

+

+

+

+Release Notes for GLQuake Preliminary Release 2 (Quake Version 1.07)

+

+-----------------------------------------------------------------------

+What's in the distribution?

+-----------------------------------------------------------------------

+This distribution contains GLQuake Drivers for Voodoo Graphics Based 3D

+Accelerators.  These drivers were tested on the following boards: 

+

+- Diamond Monster 3D

+- Orchid Righteous 3D

+- 3Dfx Interactive reference boards

+

+NOTE:  The enclosed drivers are not meant to replace any Direct3D or 

+Glide drivers provided by your Voodoo Graphics card manufacturer. 

+Please obtain supported drivers from:

+

+- Diamond supported drivers can be obtained from www.diamondmm.com

+- Orchid supported drivers can be obtained from www.orchid.com

+

+

+Included Files

+--------------

+

+OPENGL32.DLL - QuakeGL Interface to Voodoo Graphics

+FXMEMMAP.VXD - Voodoo Graphics VXD

+GLQUAKE.EXE  - ID Software provided GLQUAKE.EXE

+README.TXT   - ID Software provided README.TXT

+READ3DFX.TXT - This File

+

+All enclosed files MUST reside in your Quake directory and not in the

+Windows\SYSTEM directory.  

+

+OEMSR2 users: Do NOT replace OPENGL32.DLL located in your

+Windows\SYSTEM directory.

+

+

+

+-----------------------------------------------------------------------

+Installation 

+-----------------------------------------------------------------------

+

+Requirements

+------------

+

+- Voodoo Graphics Based 3D Accelerator

+- Windows 95

+- A PC with a Pentium 90 or higher CPU

+- 16MB of RAM

+- 2D Video card set at 16 bit or higher color

+

+Installation

+------------

+

+Adding GLQuake Driver Support

+-----------------------------

+1) Install the FULL Version (Not the Shareware version!) of Quake.

+

+2) Copy the GLQUAKE.EXE and other associated files from the GLQuake

+   ZIP file to your Quake Directory.  (Use Windows Explorer)

+

+3) Copy the enclosed OPENGL32.DLL file to your Quake Directory.

+   (Use Windows Explorer)   NOTE: DO NOT COPY OPENGL32.DLL to your

+   Windows\SYSTEM directory

+

+4) Create a Desktop Shortcut for GLQuake:  Using the right mouse button

+   drag the GLQUAKE.EXE file from Windows Explorer to the Desktop.

+         When prompted choose "Create Shortcut"

+

+5) Create an autoexec.cfg file in the ID1\ directory of your quake

+   installation if you do not already have one.  Add the line

+

+   gl_playermip "2"

+

+   to the file.

+

+6) Start GLQuake by running the shortcut. 

+

+

+Troubleshooting and Frequently Asked Questions

+----------------------------------------------

+

+1. Will GLQuake work with shareware Quake?

+

+No, the full registered version of Quake is required.  

+

+

+

+2. Do I need any other drivers to run GLQuake on Voodoo Graphics?

+

+Just make sure that the FXMEMMAP.VXD file is in your Windows\SYSTEM 

+directory and that DirectX 2.0, DirectX 3.0 or DirectX 3.0a are

+installed as GLQuake uses DirectSound. The latest version of DirectX

+can be obtained from:

+	http://www.microsoft.com/mediadev/download/isdk.htm

+

+

+

+3. I installed GLQuake and try to run the GLQUAKE.EXE file but I get a 

+"no RGB fullscreen modes available"  How do I get GLQuake to run?

+

+Make sure that your 2D video card is set to 16bit color (65K colors,

+not 16 colors). In addition, do not start GLQuake from a full screen

+MS-DOS prompt.

+

+

+

+4. GLQuake comes up for a little while then drops me back to the

+Windows 95 desktop, what's wrong?

+

+Your Virtual Memory settings on your system should be increased.  Open

+Control Panel, System - click on the Performance tab and then click on

+Virtual Memory.  Adjust the settings so that the minimum swap file size

+is 80MB.   You may also want to delete all the mesh files - do this by

+deleting the quake\ID1\glquake directory.

+

+

+

+5. Why does GLQuake try to connect to my Internet connection whenever

+it starts?

+

+GLQuake uses Windows networking. Auto-Dial is likely enabled in your

+Internet Control Panel or in Internet Explorer Options.  Single

+Player users: To disable Network use in GLQuake and prevent the

+network connection screen from coming up, add "-nolan" to the

+GLQUAKE.EXE command line, example:

+	GLQUAKE.EXE -nolan

+

+

+

+

+6. I have a three button mouse, but I can't use or set the middle 

+button in GLQuake, what's wrong?

+

+To use a three button mouse with GLQuake, your Windows mouse driver

+must support three buttons.  Use the Logitech PS/2, Serial or Bus

+driver instead of the Microsoft or Standard PS/2, Serial or Bus driver.

+Also, make certain that your Mouse control panel sets the middle button

+to "middle" and not "double click".

+

+

+

+7. Mouse input seems jumpy, how do I fix that?

+

+From the console (hit the ~ tilde key), enter m_filter 1 <enter>

+This option can be added to the AUTOEXEC.CFG file (in the \ID1

+directory).  You may also add this option to the GLQUAKE.EXE command

+line, example:

+	GLQUAKE.EXE +m_filter 1

+

+

+

+8. While playing GLQuake the sound stutters, how do I fix it?

+

+If your sound card does not support DirectSound, you may encounter

+stuttering sound during game play.  Try adding the following value to

+the CONFIG.CFG file (in the quake\ID1 directory):

+		 _snd_mixahead ".14"

+

+

+

+9. When I hit ALT-TAB or the Windows start button to switch to another

+application why do I return to a 640x480 display?

+

+GLQuake by default needs to keep the 2D display at 640x480 while it is

+running. To return the display to your normal setting you must exit

+GLQuake.  To prevent this, add the following to the GLQUAKE.EXE command

+line options "+_windowed_mouse 1" and "-window"   example:

+	GLQUAKE.EXE +_windowed_mouse 1 -window

+

+

+

+10. GLQuake multiplayer can't find other games or won't connect.

+

+GLQuake uses Windows 95 Networking.  Verify that the correct networking

+components are installed and that you can connect to the other machine

+using File and print sharing or TCP/IP ping.  If you are using IPX also

+make certain that the frame type is the same on all the systems.

+

+

+

+11. GLQuake multiplayer slows down alot, how do I fix it?

+

+Add gl_playermip 2 to the AUTOEXEC.CFG file (in the \ID1 directory)

+You may however add "+gl_playermip 2" to the GLQUAKE.EXE command line,

+example:

+	GLQUAKE.EXE +gl_playermip 2

+

+

+

+12. Does the Activision(r) Scourge of Armagon add-on (Mission Pack 1)

+work with GLQuake?

+

+Yes, start GLQUAKE.EXE with a "-hipnotic" switch.   Example:

+	GLQUAKE.EXE -hipnotic

+

+

+

+13. Do other 3rd party quake levels work with GLQuake?

+

+Not all 3rd party levels have been tested, some may not work properly

+or optimally.

+

+

+

+14. Will GLQuake use a Voodoo Graphics accelerator under Windows NT?

+

+The 3Dfx GLQuake drivers currently only work under Windows 95.  

+

+

+

+15. After installing GLQuake the OpenGL screen savers in Windows 95

+(OEMSR2) don't work. What's wrong?

+

+The OpenGL Windows 95 screen savers in OEMSR2 will fail if you copied

+the OPENGL32.DLL file that comes with GLQuake to your Windows\SYSTEM

+directory.  The 3Dfx OPENGL32.DLL file only works with Quake. It will

+not run with other OpenGL applications.  If you copied the 3Dfx 

+OPENGL32.DLL to your Windows\SYSTEM directory and need to restore the

+Microsoft provided OPENGL32.DLL, follow these steps:

+

+	OEMSR2 Users

+	------------

+	1) Insert your Windows 95 CD into your CD-ROM drive

+	2) Open a MS-DOS prompt, (Click Start, Programs, MS-DOS Prompt)

+	3) Switch to the Windows\SYSTEM directory, ie:

+		C: <enter>

+		CD\Windows\system <enter>

+	4) At the command prompt, enter:

+		EXTRACT /A E:\WIN95 opengl32.dll <enter>

+		(Substitute E:\ for your CD-ROM drive letter)

+	

+	Standard Windows 95 Users

+	-------------------------

+	1) Download and reinstall OpenGL for Windows 95 from the source

+	you previously used.

+		

+

+

+16. How do I get support for GLQuake

+

+GLQuake is currently unsupported.  You may however find answers to 

+questions on various Quake dedicated websites.  3Dfx provides a GLQuake

+newsgroup on news.3dfx.com (Newsgroup name is 3dfx.games.glquake ) to

+discuss GLQuake with other users.  3Dfx also provides a regularly

+updated GLQuake FAQ at: http://www.3dfx.com/game_dev/quake_faq.html

+

+

+

+16. How do I send a bug report?

+

+If your problem is not resolved in this document or our updated FAQ

+(please see #15) and your bug is related to visual quality, performance

+or stability send an email to quake_bugs@3dfx.com   - Describe your

+system configuration  (CPU Type, CPU Speed, 2D Video Card type, Amount

+of Memory, Virtual Memory Size..etc.) and how to recreate the bug.  

+

+

+Voodoo Graphics is a trademark of 3Dfx Interactive, Inc.  All other

 trademarks are the property of their respective owners.
\ No newline at end of file